User Manual

20200101
u
Mini Table Details Dialog Box
• The mini table details dialog box is the same as the details dialog box described under
“Details Dialog Box” on page 3-1.
• The mini table details dialog box shows details for the element where the cursor is
currently located on the mini table. Note that the cursor cannot be used to select a LANT.
or ACTI. cell.
J
(or
w
or
o
) ........... Closes the dialog box.
u
Searching for an Element Name
1. On the mini table screen, press
5
(SRC) and then
1
(NAME).
• This will display an element name search dialog box.
2. Enter up to nine characters for the element name you want to search for.
• The screen will change to show all elements whose names start with the character(s)
you input.
3. Use
f
and
c
to select the element name you want.
4. Press
w
to return to the mini table screen, with the cursor located at the element you
selected in step 3.
• “Nothing” will appear on the screen if no element name corresponds to the character(s)
you input.
• To close the dialog box and return to the mini table screen without searching for anything,
press
J
.
u
Searching for an Atomic Symbol
1. On the mini table screen, press
5
(SRC) and then
2
(SYMBL).
• This will display an atomic symbol search dialog box.
3-4
Periodic Table