Complete Manual PCR-T2500 PCR-T2600 SR-S4000 SR-S920 Electronic Cash Register (M size drawer) PCRT2500CM*E MA1808-B
Introduction Thank you very much for purchasing this CASIO electronic cash register. START-UP is QUICK and EASY! For the basic settings of your cash register, please see “Quick Start Guide”. IMPORTANT For programming assistance please visit http://casio4business.com/sa_index.html CASIO Authorized Service Centers If your CASIO product needs repair, or you wish to purchase replacement parts, please visit http://casio4business.com.
Safety Precautions...................................................................................................................E-4 Precautions for Use..................................................................................................................E-8 Regulatory Information.......................................................................................................... E-10 To use the cash register’s basic function...............................................................
Safety Precautions • Please read this “Safety Precautions” thoroughly and use the product accordingly. • Please pay due attention to the following symbols to help you use the product safely and properly and to avoid any personal injury or damage to the product. *Danger If this symbol is ignored and the product consequently misused, it can result in serious personal injury and/or death.
Safety Precautions *Warning Power supply voltage - • Do not use with any voltage other than the indicated power supply voltage. This may result in fire or electrical shock. • Do not overload the outlet with wires. This may result in fire or electrical shock. Do not disassemble or modify ! • Do not disassemble or modify the product. There are high voltage parts and sharp parts inside. Touching them may result in injury or electric shock, or cause a malfunction or fire.
Safety Precautions *Caution When moving the product $ • Always disconnect the power plug from the outlet before moving. • Always hold onto the plug when unplugging the power plug. • Pulling on the power cord may damage the cord, resulting to fire or electrical shock. LCD - • Do not press hard on the LCD or apply strong impact. This may crack the glass on the LCD, resulting to injury. • Never touch the liquid from inside when the LCD is cracked. This may result in irritation to the skin.
Safety Precautions *Caution Only use the specified batteries. - • • • • • • • Do not disassemble, modify or short-circuit them. Do not put them in fire or water or heat them. Do not mix new and old batteries or different types of batteries. Orient the terminals +- correctly. Remove the batteries if the system will not be used for a long time. After batteries are spent, dispose of them as per local regulations. Do not try to recharge dry cell batteries.
Precautions for Use Read the following items thoroughly and use this product properly. CASIO bears no responsibility whatsoever for malfunction or damage caused by handling not following below contents. Please note that it will also result in charged repair, and actual cost required for repair will be charged, even if it is within the warranty period. Installation Location Do not place in a hot or dusty location, or in any location exposed to oily smoke or water.
Precautions for Use Take Advance Notice of the Following • The content of this manual may be changed without prior notice due to improvement or specification change of the product. • Please note that CASIO bears no responsibility for damage, loss of profit, or any claim from third party due to loss or change of data caused by usage, malfunction, or repair of this product. • The copyright for this manual and all rights related to the software described in this manual are the property of CASIO Computer Co.
Regulatory Information GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A. (Not applicable to other areas) WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Regulatory Information PCR-T2500-BK, PCR-T2500L-BK, PCR-T2600L-SR, SR-S4000MC-BK, SR-S920-BK This model is available in the USA and Canada only. This device complies with Industry Canada’s applicable licence-exempt RSSs. Operation is subject to the following two conditions: (1) These devices may not cause interference, and (2) T hese devices must accept any interference, including interference that may cause undesired operation of the device.
To use the cash register’s basic function Getting started........................................................................................................................ E-13 Name of Parts.................................................................................................................................. E-13 Loading memory protection batteries........................................................................................... E-14 Installing paper roll..........................
To use the cash register’s basic function Getting started This chapter shows how to setup the cash register and get it ready to operate.
To use the cash register’s basic function Loading memory protection batteries Important: These batteries protect information stored in your cash register’s memory when there is a power failure or when you unplug the cash register. Be sure to install these batteries first. 1 Remove the printer cover. 2 Remove the battery compartment cover. 3 Note the (+) and (–) markings in the battery compartment.
To use the cash register’s basic function Installing paper roll Caution (in handling the thermal paper) • Never touch the printer head and the platen. • Unpack the thermal paper just before your use. • Avoid heat and direct sunlight. • Avoid dusty and humid places for storage. • Do not scratch the paper. • Do not keep the printed paper under the following circumstances: • High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.
To use the cash register’s basic function To install journal paper 1 2 By the same procedure of setting receipt paper, set journal paper on the journal printer. Remove the paper guide of the take-up reel. 3 Slide the leading end of the paper into the groove on the spindle of the take-up reel and wind it onto the reel two or three turns. 4 Replace the paper guide of the take-up reel. 5 Place the take-up reel into place behind the printer, above the roll paper.
To use the cash register’s basic function To set the language, date, time, tax rates and Bluetooth pairing 1 Plug in the power socket into a wall outlet. Be sure to check the rating plate on the side of the cash register to make sure that its voltage matches that of the power supply in your area. 2 As soon as the power socket is plugged in, the display shows the language selection display. Choose your language by using ? or > keys then press F key.
To use the cash register’s basic function 6 7 Using a smartphone application, you can perform cash register settings by pairing with a smartphone via Bluetooth connection. If you wish to use the smartphone application, select [YES] and pair with a smartphone. If you do not wish to pair with a smartphone via Bluetooth connection, select [NO]. You can pair with a smartphone and use the application later on in PGM mode. The followings are the procedures when you select [YES].
To use the cash register’s basic function Getting to know your cash register Mode switch Use the mode keys to change the position of the mode switch and select the mode you want to use. PGM (Programming) This position is for setting your cash register to suit the needs of your store. RF (Refund) Use this position to correct registered items. OFF The cash register turns off in this position. REG (Register) This position is for normal transactions.
To use the cash register’s basic function To adjust the main display 1 Put in fingers in the ditch of the main display and tilt it to the angle you can see clearly. To set the customer display 1 Lift the customer display until it stops. 2 Rotate the display so that customers can see it.
To use the cash register’s basic function Display Actual display shows characters in white on blue background. Main display During a registration C01 1 PLU001 3 DEPT001 REG 000004 $1.00 $6.00 1 2 SUBTOTAL $7.00 3 4 6.00 4 000004 $1.00 $6.00 $7.00 $10.00 $3.00 5 6 7 QT After finalization C01 1 PLU001 3 DEPT001 TL CASH CG REG CG 4 1 2 3 4 $3.00 8 10.00 9 QT Mode/Clerk Number or name/Consecutive No.
To use the cash register’s basic function Keyboard 1 7 13 14 15 20 RECEIPT FEED JOURNAL FEED — %– CLK # SIGN OFF 16 17 18 NONTAX 21 22 23 24 25 26 RA PO TAX PGM HELP 28 35 40 45 50 55 60 2 RECEIPT ON/OFF OPEN 8 T/S 1 T/S 2 DEPT SHIFT/ DEPT# 3 POST RECEIPT PRICE 9 7 8 9 NONTAX 4 #/NS PLU/ S.DEPT 10 4 5 6 NONTAX 5 RF X / FOR 11 1 2 3 NONTAX NONTAX NONTAX TAXABLE TAXABLE TAXABLE 00 . 31 36 41 46 51 56 6 DATE TIME ERR.
To use the cash register’s basic function 17 T 18 DEPT SHIFT/ DEPT# Use this key without a numeric entry to change the taxable 2 status of the following item. Department no. Use this key to input department numbers. Department shift: Use this key to shift the department number from 1 through 30 to 31 through 60. 19 09'^ Use these keys to input numbers. 20 SIGN OFF Use this key to sign clerk off the register.
To use the cash register’s basic function How to read the printouts • The journal/receipts are records of all transactions and operations. • The contents printed on receipts and journal are almost identical. • You can choose the journal skip function. If the journal skip function is selected, the cash register will print the total amount of each transaction, and the details of premium, discount and reduction operations only, without printing department and PLU item registrations on the journal.
To use the cash register’s basic function How to use your cash register The following describes the general procedure you should use in order to get the most out of your cash register. Before opening your store • Plugged in? (page E-17) • Enough paper roll? (pages E-15 and E-16) • Date and time are correct? (pages E-26 and E-32) • Enough small change in the drawer? (page E-26) While the store is open • Registrations (page E-27) • Issuing latest total sales report if needed.
To use the cash register’s basic function Before opening your store Checking the time and date You can check the time or date on the display whenever there is no registration being made. Step 1 2 Operation Display Press x key to show the date and x time on the display. Press C key to clear the date/time C display. Preparing bills and coins for change To prepare coins and bills for change, you can open the drawer by pressing N key.
To use the cash register’s basic function Registering items in departments The following examples show how you can use the department keys in various types of registrations. Departments are used for categorizing items for example, department 01 for vegetables, department 02 for fruits, and department 03 for canned foods etc. Single item sale Sample Operation Unit Price Item Payment $1.00 Quantity 1 Dept. 01 Cash $1.00 Step Operation 1 Enter the unit price.
To use the cash register’s basic function Repeat registration Sample Operation Unit Price Item Payment $1.50 Quantity 3 Dept. 1 Cash $10.00 Step Operation 1 Enter the unit price. 150 2 Press corresponding department key repeatedly for the purchased quantity. !!! Press o key. o Enter the tendered amount then press F key. The display shows the change to be paid. 10'F 3 4 Same priced multiple items are sold. Printout 1 DEPT001 1 DEPT001 1 DEPT001 TL CASH CG $1.50 $1.50 $1.50 $4.
To use the cash register’s basic function Split sales of packaged items Sample Operation Unit Price Item 4 for $10.00 Quantity Payment 3 Dept. 1 Cash $10.00 Three pieces of an item that price is $10.00 for four pieces are sold. Step Operation 1 Enter purchased quantity then press x key. 3x Enter the quantity of one set and press x key. 4x Enter the package price and press corresponding department and o keys. 10'!o Enter the tendered amount and press F key.
To use the cash register’s basic function Department number entry Without using Department key, you can register departments manually. Sample Operation Unit Price Item Payment $13.00 Quantity 1 Dept. 31 Cash $13.00 Registering an item in Dept. 31 without using Department key. Step Operation 1 Enter Dept. number using ten key SHIFT/ pad then press DEPT key. DEPT# 31 Enter the unit price and press : key. Then press o key. The item is registered in Dept. 31 in this example.
To use the cash register’s basic function Basic setups and registrations To program basic settings You can program basic settings in the PGM mode of the Mode switch. Step Display 1 By turning the Mode switch to PGM position, the display indicates the programming top menu. 2 Use ? or > keys to choose the item you wish to set then press F key. 3 Repeat the above step until the display shows an entry display. Input values you wish to set and press F key.
To use the cash register’s basic function Top menu Sub menu What is to be set [Date Setting] TIME (24 HOUR) [19:56] Sets date and time. MONTH [12] DATE [26] YEAR 20[18] [Clerk Setting] Secret No [0001] Operation [YES] [Message Setting] 01 Logo 1 YOUR RECEIPT 02 Logo 2 THANK YOU 03 Logo 3 CALL AGAIN Please refer to pages E-24 and E-78.
To use the cash register’s basic function Top menu Sub menu What is to be set [Bluetooth] System Setting See page E-104. Functions If you wish to perform further settings using a smartphone, please refer to page E-104. [System Setting] Used to set characters, functions of keys, or calculation methods etc.
To use the cash register’s basic function Programming departments This section explains how you can set unit prices, taxable statuses, and item groups. You can program each department linking to a certain group. For example, department 01 is for packed milk, department 02 is for cheese and both belong to group 03 (dairy goods). Sample Operation Unit Price Dept. 01 Taxable status Group $2.50 Non tax 02 Programming Dept. 01 as unit price $2.50, non taxable, belonging to Group 02.
To use the cash register’s basic function Registering departments’ preset data The following examples explain the operations using preset department data programmed in the previous section. Using preset prices Sample Operation Unit Price Item Payment $2.50 Quantity 1 Dept. 02 Cash $2.50 Step Operation 1 Just press the corresponding Department key. " Press F key to finalize the transaction. F 2 Unit price $2.50 is preset in Dept. 02. Printout 1 DEPT002 TL CASH $2.50 $2.50 $2.
To use the cash register’s basic function Programming PLUs Like departments, you can program unit price, taxable status, and linking item group in a PLU (Price Look Up). Using PLUs allow you to register items quickly and accurately. You can use up to 7,000 PLUs. Sample Operation Unit Price PLU 0014 Taxable status Group $2.50 Non tax 03 Programming PLU 0014 as unit price $2.50, non taxable, belonging to Group 03. Display Step 1 Turn the Mode switch to PGM position.
To use the cash register’s basic function Registering PLUs’ preset data The following examples explain the operations using preset PLU data programmed in the previous section. Single item sales using PLU Sample Operation Unit Price Item Quantity Payment Cash $2.50 1 PLU No. 14 $3.00 Step Operation 1 Enter the PLU number and press PLU/ S.DEPT key. One piece of PLU number 14 item has been registered. Then press o key. 14 o Enter tendered amount and press F key.
To use the cash register’s basic function PLU registration with multiplication key Sample Operation Unit Price Item $2.00 Quantity 10 PLU No. Payment 7 Cash $20.00 Step Operation 1 Enter the quantity sold then press x key. Up to 9999.999 can be entered for multiplication calculations. 10x Enter the PLU number and press PLU/ S.DEPT key. Then press o key. 7 PLU/ S.DEPT o Enter tendered amount and press F key. 20'F 2 3 Ten pieces of PLU number 7 item (preset unit price $2.00) are sold.
To use the cash register’s basic function Open PLU Although unit price is preset in a PLU, you can enter price manually if the PLU is programmed as “Open PLU”. To program open PLU, see page E-31. Sample Operation Unit Price Item 1 Quantity 1 PLU No. 30 Unit Price Item 2 Payment $32.80 $13.00 Quantity 2 PLU No. 31 Cash PLU numbers 30 and 31 are programmed as open PLU so that the unit prices can be entered manually. $60.
To use the cash register’s basic function Other registrations Discount The following example shows how you can use the p key for discount registrations. Discounts on items and subtotals Sample Operation Item 1 Item 2 Discount Subtotal discount Payment Dept. 01 $5.00 Quantity 1 Taxable 1 (preset) PLU 16 $10.00 (preset) Quantity 1 Taxable 2 (preset) Rate 5% (preset in p) Rate 3.
To use the cash register’s basic function Reduction Using the reduction feature, you can subtract a certain amount from an item’s unit price or from a subtotal amount. Sample Operation Item 1 Dept. 01 $5.00 Quantity 1 Taxable 1 (preset) Reduction Item 2 Subtotal Payment $0.25 PLU 45 $6.00 (preset) Quantity 1 Taxable 1 (preset) Reduction $0.50 (preset) Reduction $0.75 Taxable Non taxable (preset) Cash $10.
To use the cash register’s basic function Registering various payment methods Other than cash payments, you can register transactions made by checks, charges, credits, or even mixed tendering. Check sale Sample Operation Item Unit Price $11.00 Quantity 1 Reference no. of check Payment 1234 Check A $11.00 item is sold and customer paid by $20.00 check (check number 1234). $20.00 Step Operation 1 Register the item purchased.
To use the cash register’s basic function Credit sale Sample Operation Item Payment Dept. 03 $10.00 Quantity 1 Credit A purchased item is paid by a credit card. $10.00 Step Operation 1 Register the item purchased and press o key. 10'#o Press c key to finalize the transaction. c 2 Printout 1 DEPT003 TL CREDIT $10.00 $10.00 $10.00 Mixed payments (cash and check) Sample Operation Item Payment Dept. 04 $55.00 Quantity 1 Check $30.00 Cash $25.00 Customer paid $30.
To use the cash register’s basic function Tax shift By using t or T keys, you can change the taxable status. The t key switches on and off of programmed taxable status 1 and T key changes the taxable status 2. The following table explains how tax statuses change by t or T key. Non tax t 6 Tax status 1 Non tax T 6 Tax status 2 Tax status 1 t 6 Non-tax Tax status 1 T 6 Tax status 1 & 2 Tax status 2 t 6 Tax status 1 & 2 Tax status 2 T 6 Non-tax Sample Operation Item 1 Dept. 01 $2.
To use the cash register’s basic function Registering returned goods Registering returned goods in the REG mode The following example shows how to operate for registering goods returned by customer in the REG mode. Sample Operation Item 1 Item 2 Item 3 Refunded Item 1 Refunded Item 3 Payment Dept. 01 $2.35 Quantity 1 Dept. 02 $2.00 Quantity 1 PLU 001 $1.20 (preset) Quantity 1 Dept. 01 $2.35 Quantity 1 PLU 0001 $1.20 (preset) Quantity 1 Cash $2.
To use the cash register’s basic function Registering returned goods in the RF mode When a customer returns goods after the transaction has been completed, use RF mode for the refund operation. Sample Operation Refunded Item 1 Refunded Item 2 Dept. 03 $4.00 Quantity 1 Reduced $0.15 PLU 002 $1.20 (preset) Quantity 1 Discounted Payment 1 2 3 5% (preset) Cash Step A customer returned two items. Item 1 was sold with $0.15 reduction and item 2 was sold with pre-programmed 5% discount. $4.
To use the cash register’s basic function Registrations without transactions The followings are the operations other than normal sales transactions. Please do not perform these operations during a sales transaction. Registering money received on account Use this operation when you put money in the drawer without any sales transactions such case as preparing change. Sample Operation Received amount Prepared $70.00 in the drawer for change before opening the store. $70.
To use the cash register’s basic function Corrections There are three ways to correct erroneous operations that are; • Correcting erroneous item not registered • Correcting erroneous item already registered • Cancelling all the items registered in a transaction Correcting erroneously entered item not registered Step 1 2 3 4 Operation Correcting wrong unit price $2.00 to 2' $1.00. C 1'! Correcting wrong quantity 12 to 11. 12x C 11x 2'" Correcting wrong PLU number 002 2 to 003. C 3 PLU/ S.
To use the cash register’s basic function Correcting items immediately after the registration Step Operation 1 Registering an item. 1'! 2 By mistake, Dept. key has been pressed twice so cancelling the preceding registration by e key. 2'"" e Cancelling wrong PLU registration (PLU No. 2) and re-registering correct PLU (PLU No. 5). 2 PLU/ S.DEPT e 5 PLU/ S.DEPT 3 4 5 6 7 8 9 Cancelling a registration of an open 15 PLU/ S.DEPT PLU’s (PLU No. 15) wrong unit price 6':e $6.
To use the cash register’s basic function Voiding an item which has been already registered Display Step 1 During a registration. 2 Using ? or > keys, select the item you have misregistered. 3 Press F key. The selected item is voided.
To use the cash register’s basic function Cancelling all items in a transaction Display Step 1 Press o key after items have been registered then press e key. 2 Select [YES] on the pop up display. C01 CANCEL OPEARTION Please select Yes : No : ST QT 3 Press F key. The registered items are cancelled. E-51 11 000011 0 0 0 0 0 $24.00 0.
To use the cash register’s basic function Daily sales reports At the end of the business day, you can print categorized and summarized results of the day. Reset report (Z) clears all the sales data whereas the data remains in memory by Read report (X). Please do not perform the Reset report (Z) printing while your store is open. It clears all the sales data. Display Step 1 Turn the Mode switch to X or Z position. The display shows top display of sales reports.
To use the cash register’s basic function Print out of daily sales report 20−06−2018 17:00 0001 000231 −−−−−−−−−−−−−−−−−−−−−−−− Z DAILY Z −−−−−−−−−−−−−−−−−−−−−−−− Z DEPT 0001 0001015 1 2 DEPT001 6 Z 203.25 $1,108.54 DEPT002 183 $1,362.26 DEPT008 5 $17.22 −−−−−−−−−−−−−−−−−−−−−−−− TL 421.25 $2,872.28 −−−−−−−−−−−−−−−−−−−−−−−− Z FIX 0001 0001011 GROSS 981.25 $6,574.40 NET No 111 $7,057.14 CAID $1,919.04 CHID $139.04 CKID $859.85 CRID(1) $709.85 CRID(2) $0.00 CRID(3) $0.00 CRID(4) $0.
To use the cash register’s basic function TA1 $2,369.69 TX1 $128.86 TA2 $2,172.96 TX2 $217.33 −−−−−−−−−−−−−−−−−−−−−−−− GT $00000000125478.96 −−−−−−−−−−−−−−−−−−−−−−−− Z TRANS 0001 0001012 CASH No 362 $1,638.04 CHARGE No 56 $1,174.85 RA No 4 $810.00 PO No 5 $520.00 $5.00 CORR No 14 $39.
Advanced programmings and registrations Advanced registrations.........................................................................................................E-57 Enabling clerk assignment.............................................................................................................E-57 Registrations with clerk assignment.............................................................................................E-58 Single item cash sales.............................................
Advanced programmings and registrations In case the register is locked up.................................................................................................. E-116 About the low battery indicator................................................................................................... E-117 About open source code.............................................................................................................. E-117 Specifications...........................................
Advanced programmings and registrations Advanced registrations Enabling clerk assignment By assigning a clerk, clerk number or name will be printed on receipts. The following operation enables the register to use the clerk assignment. Step Operation 1 Turn the Mode switch to PGM position. The display shows programming top menu. 2 Using ? or > keys, select [General Setting] and press F key.
Advanced programmings and registrations Registrations with clerk assignment By signing a clerk on, the clerk name will be printed on receipts and sales reports. Step Operation 1 1o 2 3 Enter the clerk number and press o key. Printout * Perform registration operations. The clerk name is printed on receipts and displayed on top of the display. To sign a clerk off, enter 0 and press o key. Or just press SIGN OFF key. commercial message REG C01 * 20−06−2018 11:58 0001 000123 1 DEPT01 T1 1 $1.
Advanced programmings and registrations Single item cash sales A department key or a PLU programmed as single item sale status finalizes the transaction as soon as it is registered. This feature can be used only in cash sales. To program single item sales status see pages E-31. Sample operation 1: Simple single item sale Item Dept. 01 $1.00 Quantity 1 Dept. 01 is programmed as single item sale and unit Single item price is not preset. Preset Payment Cash $1.
Advanced programmings and registrations Sample operation 3: Single item sale with another item Item 1 Dept. 03 $2.00 Quantity 1 Preset Item 2 Payment Normal Dept. 01 $1.00 Quantity 1 Preset Single item Cash $3.00 Step Operation 1 Register item 1. 2'# 2 Single item sale department key does not finalize the transaction as it is not single item sale. ! Press F key to finalize the transaction. F 3 Dept. 03 is a normal department while dept. 01 is programmed as unit price $1.
Advanced programmings and registrations Character settings This chapter explains how you can program department or PLU descriptions, store messages, key descriptions, report title, total descriptions (such as gross total, net total etc.) and clerk names. There are two ways to program characters which are using character keyboard and using multi typing of ten key.
Advanced programmings and registrations Using ten key pad To set characters by using ten key, you need to press one of the ten key repeatedly until desired character appears on the display. Multi typing keyboard DBL SIZE 2 7 8 4 5 1 2 GHI SPACE C 3 4 PQRS 0 1 1 Alphabet keys 8 9 V ABC JKL TUV 00 9 DEF 6 MNO SUBTOTAL 6 CA/AMT TEND 7 3 WXYZ . ► DEL 8 5 Hitting one of those keys repeatedly changes characters in the order shown in the table below.
Advanced programmings and registrations 2 Double size letter key Assigns the next input character to be double sized. After setting a double sized character, press this key again for normal size. 3 Space key Sets a space. 4 Clear key Clears all the characters. 5 Delete key Clears the last input character. 6 Program end key Terminates the character programming. 7 Character enter key Registers the programmed characters. 8 Right cursor key Moves the cursor to the right.
Advanced programmings and registrations Setting characters The following explanation shows how you can set a name in a PLU. You can also set names to departments, function keys (p, m), and clerks by the same method. Sample Operation To set “MILK” to PLU0001 by using ten key pad. Display Step 1 Turn the Mode switch to PGM position. The display shows the program top menu. 2 Using ? or > keys, select [PLU Setting] and press F key. Enter the PLU number in which you wish to set characters and press F key.
Advanced programmings and registrations Setting symbol characters You can change the symbols or titles of sales reports for example, printing “CASH IN DRW” on the sales reports instead of “CAID” for cash amount in drawer. Step Operation 1 >▪▪▪▪▪> F 2 3 4 5 6 Turn the Mode switch to PGM position and select [System Setting] then press F key. [System Setting] is the last column on the programming top menu and is not shown on the first screen. Keep pressing > key until it appears on the screen.
Advanced programmings and registrations Sales report symbols Memory No.
Advanced programmings and registrations Memory No.
Advanced programmings and registrations Other symbols Numbers in ( ) are digits to be used. Memory No. Program code Contents Default character 01 main currency symbol (2), @ (2), No.(2), split pricing (2), not used (4), sub currency symbol (2) 02 No. of item sold (2), No.
Advanced programmings and registrations Advanced programmings This section explains how you can program detail settings of the register such as setting register’s specific number, whether to reset consecutive number on the receipt after a Reset (Z) report or not, whether to print taxable amounts on receipts or not, etc. The following table lists what can be programmed in this settings. Set code Settings No.
Advanced programmings and registrations Programming detail settings To program the detail settings of the register, please follow the operations shown below. Step Operation 1 >▪▪▪▪▪> F 2 3 4 5 Turn the Mode switch to PGM position and select [System Setting] then press F key. [System Setting] is the last column on the programming top menu and is not shown on the first screen. Keep pressing > key until it appears on the screen. Enter 3 and press o key to set the register in the programming mode.
Advanced programmings and registrations Set code 04 (Tax system) Description Canadian rounding system Roundings Last digit: 0 to 2 → 0, 3 to 7 → 5, 8 and 9 → 10 US tax system = 1, Canadian tax system = 2 (Default value depends on the country shipped to) Selection No = 0 Yes = 7 Program code Default value B D10 º D10 Select 1 or 2 B D9 ¡ or ™ D9 º to º D8 to D1 º to º D8 to D1 Must be “00000000” (eight zeros) Example: To set Canadian tax system with Canadian rounding system.
Advanced programmings and registrations Set code 06 (Calculation and operation methods) Description Selection Succeeds the taxable status and commission status of previous item when +/ - operation is performed. a Yes = 0 No = 1 Force money declarations before read(X) or reset (Z) reports operations. b No = 0 Yes = 4 Force to press o key before finalization. a No = 0 Yes = 1 Allow finalization when subtotal amount is zero or minus. b Yes = 0 No = 2 Allow multiple refund operation.
Advanced programmings and registrations Set code 08 (Fixed total print control) Description Selection Print gross sales total (GROSS) on fixed total report. Print net sales total (NET) on fixed total report. Print cash in drawer (CAID) on fixed total report. a Yes = 0 No = 1 b Yes = 0 No = 2 c Yes = 0 No = 4 Print charge in drawer (CHID) on fixed total report. Yes = 0 No = 2 Print check in drawer (CKID) on fixed total report. Print credit in drawer on (CRID(1) ~ (4)) on fixed total report.
Advanced programmings and registrations Example: • On the fixed total report, not printing gross sales total (a = 1), not printing net sales total (b = 2), not printing cash in drawer. (c = 4): D10 = 7 (1 + 2 + 4). • Not printing charge in drawer on fixed total report: D9 = 2. • On fixed total report, not printing check amount in drawer (a = 1), not printing credit amount in drawer (b = 4): D8 = 5 (1 + 4). • D7 must be always 0. • Not printing refunded amount in RF mode on fixed total report: D6 = 4.
Advanced programmings and registrations Set code 09 (Fixed total print control 2) Description Selection Print taxable amount 1 total on fixed total report. (TA1) Print tax 1 total on fixed total report. (TX1) Print taxable amount 2 total on fixed total report. (TA2) Print tax 2 total on fixed total report. (TX2) Print taxable amount 3 total on fixed total report. (TA3) Print tax 3 total on fixed total report. (TX3) Print taxable amount 4 total on fixed total report.
Advanced programmings and registrations Set code 10 (Print control of taxable amount) Description Print taxable amount 1 on receipt/journal. a Print taxable amount 2 on receipt/journal. b Print taxable amount 3 on receipt/journal. c Print taxable amount 4 on receipt/journal. a Print taxable amount 5 on receipt/journal. b Print taxable amount 6 on receipt/journal. c Print taxable amount 7 on receipt/journal. a Print taxable amount 8 on receipt/journal.
Advanced programmings and registrations Set code 15 (Printing methods of sales reports) Description Selection Department zero skip (Departments of sales amount zero are not printed on sales reports.
Advanced programmings and registrations Set code 17 (Date/time printing on journals/receipts) Description Selection Print date on journal. Print consecutive number on receipt/journal. Print time on receipt. Print time on journal. a Yes = 0 No = 2 b Yes = 0 No = 4 a Yes = 0 No = 1 b Yes = 0 No = 2 Program code Default value B (a+b) D4 º (a+b) D4 B (a+b) D3 º (a+b) D3 º D2 º D2 B (a+b+c) D1 º D1 Must be “0” Alert electronic journal near end/end.
Advanced programmings and registrations Set code 27 (Clerk operation selections) Description Selection Program code Default value No = 0 Yes = 4 B D9 º D9 º to º D8 to D1 º to º D8 to D1 Allow clerk functions. Must be “00000000” Set code 30 (Thermal printer control) Description Selection Program code Default value Select POP image: Effective when D5 is 1; always print same image. Image1 = 1 Image2 = 2 Image3 = 3 Image4 = 4 Image5 = 5 B D6 º D6 Print condition of POP message.
Advanced programmings and registrations Programming functions of departments and PLUs in a lump There are two methods to set functions of departments or PLUs which are programming at once and programming individual functions. Programming department functions in a lump This method programs function of a department at one time. Step Operation 1 Turn the Mode switch to PGM position and select [System Setting] then press F key.
Advanced programmings and registrations Department and PLU lump set code Description Selection Program code Default value Single item sales: Normal item = 0, Single item = 3 0 or 3 B D12 º D12 Must be “0000” 0000 ºººº D11 D10 D9 D8 ºººº D11 D10 D9 D8 Taxable status 1 Taxable status Taxable status for USA Taxable status for Canada Taxable status 2 Taxable status 3 a No = 0 Yes = 1 b No = 0 Yes = 2 c No = 0 Yes = 4 Non tax = 0, Taxable 1 = 1, Taxable 2 = 2, Taxable 3 = 3, Taxable 4 = 4,
Advanced programmings and registrations Programming PLU functions in a lump This method programs functions of a PLU at one time. Step Operation 1 >▪▪▪▪▪> F 2 Turn the Mode switch to PGM position and select [System Setting] then press F key. Enter 3 and press o key to set the register in the programming mode. 3o 3 Enter four-digit PLU number then press 0014 4 Referring the table in the previous section, input 12- digit program code. BB▪▪▪▪▪BB Press F key. F 5 6 7 PLU/ S.DEPT key.
Advanced programmings and registrations Programming functions of departments and PLUs individually Programming functions of departments individually This part explains programming methods of each function of departments individually. Step Operation 1 Turn the Mode switch to PGM position and select [System Setting] then press F key. >▪▪▪▪▪> F Enter 3 and press o key to set the register in the programming mode.
Advanced programmings and registrations Set code table Set code Description Always “0” 03 Taxable status Taxable status for USA No = 0 Yes = 2 c No = 0 Yes = 4 Non tax = 00, Taxable 1 = 01, Taxable 2 = 02, Taxable 3 = 03, Taxable 4 = 04, Taxable 1 & 2 = 05, Taxable 1 & 3 = 06, Taxable 1 & 4 = 07 00 to 07 BB D2 D1 No = 0 Yes = 4 B Open PLU (Only for PLU) Allow negative unit price. Commission 2 Linking group (000 to 999) Must be 0 Linking dept.
Advanced programmings and registrations Programming functions of PLUs individually This part explains programming methods of each function of PLUs individually. Step Operation 1 Turn the Mode switch to PGM position and select [System Setting] then press F key. >▪▪▪▪▪> F Enter 3 and press o key to set the register in the programming mode. 3o Referring the tables in the proceeding section, enter twodigit set code you wish to program followed by two 6s.
Advanced programmings and registrations Programming functions of transaction keys This section explains how you can program functions in each transaction keys such as F, h or m keys. For example, programming F key to force entry of tendered amount. Step Operation 1 Turn the Mode switch to PGM position and select [System Setting] then press F key. >▪▪▪▪▪> F Enter 3 and press o key to set the register in the programming mode.
Advanced programmings and registrations Program code for and ] keys RA Description Maximum amount. e.g.) $100.00; D4 = 1, D3 = 4. Selection Program code Maximum value (0 ~ 9) BB D4 D3 Number of zeros (0 ~ 9) Must be “00” 00 ºº D2 D1 Example: To set ] key not allowing to enter more than $9.00.
Advanced programmings and registrations Program code for p key Description Selection Program code 0 º D8 Always “0” Taxable status Taxable status for USA Taxable status 1 a No = 0 Yes = 1 b No = 0 Yes = 2 c No = 0 Yes = 4 Non tax = 00, Taxable 1 = 01, Taxable 2 = 02, Taxable 3 = 03, Taxable 4 = 04, Taxable 1 & 2 = 05, Taxable 1 & 3 = 06, Taxable 1 & 4 = 07 00 to 07 BB D8 D7 No = 0 Yes = 2 B D6 0, 1 or 2 B D5 00 ºº D4 D3 Taxable status 2 Taxable status 3 Taxable status for Canada Pro
Advanced programmings and registrations Program code for x key Description Multiplication procedure ! Quantity × Amount, @ Amount × Quantity Roundings: Round off = 0, Cut off = 1, Round up = 2 Must be “0000” Selection Program code !=0 @=1 B D6 0, 1, or 2 B D5 0000 ºººº D4 D3 D2 D1 Selection Program code 01 to 04 BB D8 D7 000000 ºººººº D6 D5 D4 D3 D2 D1 Program code for t and T keys Description Taxable status (01 ~ 04) (Taxable 1 if “00” is set) Must be “000000” Program code for c key.
Advanced programmings and registrations Programming further clerk functions This section explains how you can set further programming for clerks such as setting the register in training mode or setting commission rates given to clerks. In the training mode, the register operates normally but the results will not be stored in the memory. You can use this feature for getting to know the operations of the cash register for yourself or for newly hired clerks.
Advanced programmings and registrations Printing programmed data After programs have been set, you can print the programmed data. To print programmed unit price or percentage (other than PLU) Step 1 Turn the Mode switch to PGM position and select [System Setting] then press F key. 2 Enter 1 and press o key. 3 Press o key again. The printer starts to print preset data. Printout 1: Program read symbol P01.................... CASH − %− DEPT001 DEPT002 @0.00 @1.00 10% 0001−05 @1.00 0002−05 @2.
Advanced programmings and registrations To print programmed characters (except PLUs) Step 1 Turn the Mode switch to PGM position and select [System Setting] then press F key. 2 Enter 2 and press o key. 3 Press o key again. The printer starts to print preset data. Printout 1: Program read symbol P02....................
Advanced programmings and registrations To print general programming (except PLUs) Step 1 Turn the Mode switch to PGM position and select [System Setting] then press F key. 2 Enter 3 and press o key. 3 Press o key again. The printer starts to print preset data. Printout 1: Program read symbol P03....................
Advanced programmings and registrations Printout 17: Clerk detail link program 0001−30 NET 0001−38 REG1 1 2 DEPT001 CASH 0002−38 0001−62 MC#01 0001−98 0002−98 18: A rrangement program/Rec-#/file-#/arrange no.
Advanced programmings and registrations To print preset characters of PLU Step 1 2 3 Printout Turn the Mode switch to PGM position and select [System Setting] then press F key. Enter 6 and press o key to set the register in the programming mode. Enter 204 and press o key. 4 Enter starting PLU number and press F key. 5 Enter the last PLU number and press F key. P02.................... 1 #0001 − #0010 PLU0001 0001−04 PLU0002 0002−04 PLU0003 0003−04 2 3 1: Program 2 mode symbol 2: Range of PLU No.
Advanced programmings and registrations Printing various sales reports You can print categorized sales reports such as PLU sales report, item group sales report, hourly sales report etc. • Please do not perform the reset (Z) report during the business hour as it clears stored sales data from the memory. • Please see page E-53 for printout sample of a daily report. Printing various sales reports The followings are the example operation for printing an electronic journal (EJ) of February 28, 2018.
Advanced programmings and registrations PLU sales report X PLU 0000014 PLU0001 17 0.53% $17.00 #0001 PLU0100 42 4.03% $69.00 #0100 −−−−−−−−−−−−−−−−−−−−−−−− TL 188.61 $516.10 1 2 3 4 5 1 2 3 4 5 6 7 Read symbol/report title 1 2 3 4 5 6 Read symbol/report title 1 2 3 4 5 6 7 8 9 10 11 Read symbol/report title Report code PLU name/Quantity Sales ratio/PLU amount PLU code Total Quantity Total amount 6 7 Item group sales report X GROUP 0000016 GROUP01 203.25 33.87% $1,108.54 GROUP02 183 40.
Advanced programmings and registrations Monthly sales report X 0000020 1 2 1236.76 $12,202.57 No 214 $12,202.57 3 4 5 6 7 MONTHLY 1...... GROSS NET 31...... GROSS 2132 $14,187.57 NET No 205 $13,398.76 −−−−−−−−−−−−−−−−−−−−−−−− TL GROSS 9746.63 $161,022.49 $16.52 NET No 2351 $161,022.49 $68.49 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Read symbol/report title 1 2 3 4 5 6 7 Read report symbol/report title Report code Date of month Gross symbol/Quantity Gross sales amount Net symbol/No.
Advanced programmings and registrations Electronic journal X EJ 0000058 REG 06−20−2018 11:58 C01 0001 000123 1 DEP0T01 T1 $1.00 1 DEPT002 T1 $2.00 5 DEPT003 $5.00 7 No TA1 $3.00 TX1 $0.15 TX1 $0.10 TL $8.10 CASH $10.00 CG $1.
Advanced programmings and registrations To print individual department and PLUs Instead of printing sales reports in a lump, you can obtain reports of specific departments or PLUs. Step 1 2 Printout Turn the Mode switch to X position. X Just press department keys or enter PLU numbers. For example, 1 3 PLU/ S.DEPT DEPT SHIFT/ DEPT# 89 # for Dept.033. PLU/ S.DEPT for PLUs 1 and 89. Press o key to exit from individual report printing. 1 INDIVIDUAL DEPT033 8.13% PLU0001 0.53% #0001 38 $257.
Advanced programmings and registrations Periodic sales report Apart from daily report, you can obtain periodic sales report. The register prints total sales data from the last periodic report. Namely, if you do this operation monthly, you can obtain monthly sales reports. The cash register allows you to obtain two kinds of periodic reports so that not only monthly reports, you can also get weekly reports. Step Display 1 Turn the Mode switch to X2/Z2 position. The display shows report selection screen.
Advanced programmings and registrations −−−−−−−−−−−−−−−−−−−−−−−− ZZ1 PERIODIC 1Z −−−−−−−−−−−−−−−−−−−−−−−− ZZ1 DEPT 0001 0001115 DEPT001 8.13% DEPT002 38 $257.53 18 $1,362.26 −−−−−−−−−−−−−−−−−−−−−−−− TL 88.61 $1,916.10 −−−−−−−−−−−−−−−−−−−−−−−− ZZ1 FIX 0001 0001111 GROSS 981.25 $6,574.40 NET No 111 $7,057.14 CAID $6,919.04 CHID $139.04 CKID $859.85 CRID(1) $709.85 CRID(2) $0.00 CRID(3) $0.00 CRID(4) $0.00 −−−−−−−−−−−−−−−−−−−−−−−− RF No 3 $10.22 CUST CT 111 AVRG $63.57 DC $1.22 REF $2.42 ROUND $0.
Advanced programmings and registrations −−−−−−−−−−−−−−−−−−−−−−−− ZZ1 TRANS 0001 0001112 CASH No 362 $1,638.04 CHARGE No 56 $1,174.85 RC No 4 $810.00 PD No 5 $5.00 CORR No 14 $39.55 RCT No 3 NS No 5 −−−−−−−−−−−−−−−−−−−−−−−− ZZ1 CASHIER 0001 0001117 C01 GROSS NET C02 * * 1 1 2 3 1 2 3 4 5 6 7 8 9 Function key report title/reset counter Report code Function key count/amount *1 Clerk report title/reset counter Report code Clerk name Gross total Net total Clerk name 4 5 ...............1 513 $1,654.
Advanced programmings and registrations Bluetooth setting This setting connects the register and a smartphone by means of Bluetooth. Top menu Sub menu What is to be set [Bluetooth] System Setting OFF To stop sending X or Z data to a smartphone, set “X data → mobile” and “Z data → mobile” of “Function” “NO”. Turns off when not using Bluetooth pairing. ON Pairing with mobile Pairs with a smartphone. Clear paired mobile Clears pairing settings.
Advanced programmings and registrations Step 3 Display Press F key. The display shows “System Setting” [OFF]. Press F key again and select [ON] by ? key. System Setting OFF Select & or Cancel 4 Press F key and select [Pairing with mobile]. System Setting ON Pairing with mobile Clear paired mobile Select & or Cancel 5 Press F key then activate Bluetooth on your smartphone.
Advanced programmings and registrations Using an SD card Cautions when using optional SD memory card This cash register accepts only SD or SDHC memory cards. • The cash register supports SD cards conforming to SD standard. Capacity of the cards must be less than 2GB for SD card, between 2GB and 32GB for SDHC card. * Please note that we do not guarantee for all the performances and data-handling capacities of SD or SDHC memory cards even the above conditions are satisfied.
Advanced programmings and registrations To format an SD card When you use unformatted new SD card, you must format the SD card first. It may take time to access to an SD card immediately after it is formatted. All the data stored in the SD card will be cleared if you execute formatting. Step Display 1 Insert an SD card into the SD card slot. 2 Turn the Mode switch to PGM position and select [SD card]. 3 Press F key. Select [SD Format] on the SD card setting screen.
Advanced programmings and registrations To store program data in an SD card The following operation explains how you can back up all the program data in an SD card. Step Display 1 Insert an SD card into the SD card slot. 2 Turn the Mode switch to PGM position and select [SD card]. Then press F key. 3 Select [Program→SD] and press F key.
Advanced programmings and registrations Restoring backup data (automatically backed up setting data) from built in flash memory Other than in an SD card, setting data (except sales data) may be backed up in the built in flash memory as well as in an SD card (printer prints “Data Backup Normal End”). If AC power cord is plugged out while battery power is low, all the setting data will be cleared and the cash register needs to be initialized.
Advanced programmings and registrations Handling of the cash drawer To lock and unlock the cash drawer Turning the drawer key clockwise locks the drawer and turning counterclockwise unlocks the drawer. Unlock Lock To pull out the cash drawer 1 Remove the bill coin tray. 2 Lifting the front part of the drawer, pull it out.
Advanced programmings and registrations To remove coin divider (certain models) For the models with a hook on lower part of coin divider, you can move the coin partition. 1 Pushing down the hook, lift up the coin partition. 2 To set the partition, insert it in the groove on the coin case and push it until it is hooked. You can check the state of the hook from the bottom of the coin case. • Some types of cash drawers cannot remove the coin partition.
Advanced programmings and registrations Before you consider it as a problem Error code table Error code Message Meaning Action E001 Wrong mode Mode switch position changed before finalization. E003 Wrong operator The signed on clerk differs from the Input correct check number or asclerk performed the tracking check sign the proper clerk number. registration. E004 Error INIT/FC Initialization or unit lock clear opera- Complete operation. tion in progress.
Advanced programmings and registrations Error code Message Meaning Action E040 Issue guest receipt Attempt to register a new transac- Issue a guest receipt. tion without issuing a guest receipt. E046 REG buffer full Registration buffer full. Finalize the transaction. E049 CHECK memory full Check tracking index memory full. Finalize and close the check number currently used. E050 DETAIL memory full Check tracking detail memory full. Finalize and close the check number currently used.
Advanced programmings and registrations Error code Message Meaning Action E204 Check the write protect switch Write protect switch of the SD card is on. Turn the write protect switch off. E205 File already exist. Cannot write, because designated file has already been in the SD. Check the operation and retry. E220 (Bluetooth error) No device is connected via Bluetooth. No device is connected via Bluetooth. Activate Bluetooth on your mobile and connect with the cash register.
Advanced programmings and registrations About HELP guidance In any Mode switch position, pressing / key prints a guide menu shown below. ENTER NUMBER THEN PRESS KEY. 01:HOW TO REPLACE PAPER ROLL? 02:WHEN AN ERROR OCCURS 03:IN THE CASE OF POWER FAILURE 04:ABOUT THE LOW-BATTERY INDICATER Enter the guidance number and press / key. The printer prints the guidance what to be done. For example, enter 04 and press / key to print the guidance in case LOW-BATTERY is shown on the display.
Advanced programmings and registrations When “EJ FULL” sign appears on the display When the register shows this sign, issue electronic journal read report (if necessary) and reset the memory immediately. In case of power failure If the power supply to the cash register is cut by a power failure or any other reason, simply wait for power to be restored. The details of any ongoing transaction as well as all sales data in memory are protected by the memory backup batteries.
Advanced programmings and registrations About the low battery indicator If this indicator appears when you switch the cash register on, it can mean one of three things: • No memory backup batteries are loaded in the cash register. • The power of the batteries loaded in the unit is below a certain level. • The batteries loaded in the unit are dead. Important ! Whenever the low battery indicator appears on the display, load a set of two new batteries as soon as possible.
Advanced programmings and registrations Specifications Entry 10-key system, buffer memory 8 keys (2-key roll over) Department Full key system Main display 26 characters x 10 lines, Dept. name, PLU name, Total, Transaction names, Change Customer display 20 characters x 1 line.
