Owner's Manual

12
Getting Started
Machine initialization
Machine initialization and program auto loading
You must perform the following procedure to initialize the cash register before using it for the first time.
Important
This procedure clears all of the totalizers and programs currently contained in the memory, and
reload the standard program into memory.
This operation should be performed before using the cash register for the first time only.
X
Z
CAL
REG
OFF
RF
PGM
Mode Switch
Mode Switch
(1) Plug the power code into an AC outlet.
(2) Set the Mode Switch to OFF.
j,
(3) While holding down the

(4) Release the j
X
Z
CAL
REG
OFF
RF
PGM
and enter 23010s
turn the Mode Switch to PGM.
Initialization and program auto loading are complete,
and initialization receipt issued.
You should see “0000000000” on the display.
If another character is shown,
immediately set the Mode Switch to OFF
and start the beginning of this procedure.
C-A32
PGM
REG
XCAL Z
0000000000
TOTAL CHANGE
AMOUNTPLU
DEPT RPT
RCT
T/S1 T/S2 T/S3
+– ×÷
7.