User manual

Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1. Enter the World Time Mode or the
Stopwatch Mode with the stopwatch reset
to all zeros.
l
Navigating Between Modes
l
Measuring Elapsed Time
2. Press (B).
The second hand will indicate the last
receive result for nine or ten seconds.
30
3. Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
●
If more than 10 seconds elapse before
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4. Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
30
Crown
5. Push the crown back in.
Note
●
If the watch is paired with a phone,
CASIO WATCHES can be used to
disable auto time adjustment.
l
Using CASIO WATCHES to
Disable Auto Time Adjustment
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Note
●
This function is available only while
CASIO WATCHES is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
A
Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO “CASIO WATCHES” app and install it
on your phone.
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “CASIO WATCHES” icon.
●
Tap on the “My Watch” tab. Next,
select the applicable product name.
3.
X
Hold down (B) for at least 2.5 seconds
until the second hand points to [C].
4.
Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection is established
between the watch and phone, the
second hand moves to [C].
●
If pairing fails for some reason, the
watch will return to the state in step 1 of
this procedure. Perform the pairing
procedure again from the beginning.
Note
●
The first time you start up CASIO
WATCHES, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Auto Time Adjustment
The watch will connect with a phone at preset
times each day and adjust its time settings.
● Using This Function
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave the watch in the World Time Mode or in
the Stopwatch Mode while it is reset to all
zeros, it will perform the time adjustment
operation automatically as you go about your
daily life, without any operation required by
you.
12:30
Operation Guide 5603
9