User manual

5. Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
80 40
90
30
20
50
70
10
60
00
Year (10’s digit)
6. Press (B).
This enables the year one’s digit setting
operation.
7. Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
84
9
3
2
5
7
1
6
0
Year (one’s digit)
8. Press (B).
This enables the month setting operation.
10
11
12
84
9
3
2
5
7
1
6
Month
9. Rotate the crown to change the month.
10. Press (B).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
30
Day
●
Changing the day setting will cause the
mode hand to rotate repeatedly.
l
Hand and Day Indicator Movement
11. Rotate the crown to change the day.
●
To return to the hour and minute setting
operation, press (B).
12.
On a time signal at the top of a minute,
push the crown back in.
Configuring the Summer Time
Setting (Home City)
If you are in an area that observes summer
time, you can also configure a summer time
setting.
Note
●
The initial factory default summer time
setting for all cities is [AT (AUTO)]. In
many cases, the [AT (AUTO)] setting
lets you use the watch without
switching between summer time and
standard time.
●
When performing a manual operation
to select a time zone for which there is
no city name displayed, use [STD] or
[DST] for the summer time setting.
1. Pull out the crown to the second click.
The second hand will point to the currently
selected time zone.
2. Press (B).
This enables the summer time setting
operation.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
3. Rotate the crown to change the summer
time setting.
30
Summer time setting
Crown
●
[AT (AUTO)]
The watch switches between standard
time and summer time automatically.
●
[STD]
The watch always indicates standard
time.
●
[DST]
The watch always indicates summer
time.
4. Push the crown back in to its normal
position.
Checking the Last Time
Adjustment Result
1. Enter the World Time Mode or the
Stopwatch Mode with the stopwatch reset
to all zeros.
l
Navigating Between Modes
l
Measuring Elapsed Time
2. Press (B).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Second hand
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
Operation Guide 5603
8