User manual

Changing the Home City
Summer Time Setting
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCHES.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Use CASIO WATCHES to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
1. Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
Important!
●
If you have problems establishing a
connection, it could mean that CASIO
WATCHES is not running on the
phone. On the phone’s Home Screen,
tap the “CASIO WATCHES” icon. After
the app starts up, hold down the
watch’s (B) button for at least 2.5
seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCHES: “Watch settings”
n
“Connection time with the app”.
Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30
30
DisconnectedConnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Operation Guide 5603
12