User manual

● Swapping Your World Time and Home
Time
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
30
30
World Time City
(New York)
World Time City
(Tokyo)
Home City
(New York)
Home City
(Tokyo)
After swapping
Before swapping
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use CASIO WATCHES to
adjust them.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
DisconnectedConnected
2.
X
Hold down (B) until the second hand
points to [C] three times.
A connection will be established between
the watch and phone, and then the
phone’s ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
3.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
You can use CASIO WATCHES to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5603
11