User`s guide

3.
Communication CASIO=>PC Receive
•
The CASIO contents can be copied in an empty database by using menu commands File

New dossier
(Alt-F, N). Give the CASIO unit type in the New dossier window. In case of existing dossier the unit type
can be modified in the Options

Unit type window (Alt-O,U).
•
If CASIO containing secret items , you can set the database to secret mode in the New dossier window, or
for existing dossier you can convert to secret mode in Options

Unit type window (Alt-O,U).
•
Set the data communication parameters in the Options

Communication parameters window (Alt-O,
C). (Case in CASIO SF-... set to same with Data Comm.

Set Hardware parameters settings of Unit.)
•
Go to the Receive window by the menu point Communication

Receive (Alt-C, Enter), and then select
the mode of data receiving, and set up options.
•
Connect the cable to the COM (serial) port of the PC.
•
Start receive on PC with OK button, or Enter key.
•
Do the things listed in Receive… window, that is start sending in CASIO.
•
When reception is finished, you can start again the receiving and can send another register or data items
or finish data communication.
4.
Communication PC=>CASIO Send
•
When starting DD-Link the program loads the recently used database by default. If you want to upload
another database into DD-Link, do it with the function File

Open (Alt-F, O).
•
Set the data communication parameters in the Options

Communication parameters window (Alt-O,
C). (Case in CASIO SF-... set to same with Data Comm.

Set Hardware parameters settings of Unit.)
•
Go to the Send window in the menu point Communication

Send (Alt-C, S), then select the scope of
send, that is transmit one item or one or more registers. Other options of sending can be set then select to
transmit the secret or open data area.
•
Connect the cable, and start sending on PC with OK button, or Enter key.
•
Do the things listed in Send… window, that is start receiving on CASIO.
5.
Communication PC<=>CASIO Synchronize
•
The data items of the uploaded database are compared to CASIO's contents, and missing data items (PC
or CASIO) can be copied to the other side.
•
Go to the Synchronize window in the menu point Communication

Synchronize (Alt-C, Y), and select
the scope of synchronize
whether to
compare one or more registers or full databases.
•
Go to the Synchronize window in the menu point Communication

Synchronize (Alt-C, Y), and select
the scope of synchronize to compare one or more registers or full databases. Other options of send or
receive can be set and select to compare the secret or open data area.
•
Connect the cable, and start receiving on PC with OK button, or Enter key.
•
After the PC has received the data items and compared them with the other data items, you should do all
that are listed in the Send… window to PC=>CASIO Send.
6.
Direct Synchronize (PC Sync)
•
If PC Sync function available in your unit, the database of the actual dossier and the unit can be
harmonized with the Communication

Direct synchronize menutiem. (Alt-C, D). Set up in Options

Communication parameters window to start the direct synchronize in PC automatically by pressing the
Shift-Synchronize keys of unit, or – in case of PV – the Start button of cradle (without touching PC).
•
Set up in pop-up window of Direct Synchronize the Conflict Solution Method and other options, then
start receive with OK button.
•
Connect the cable, and start synchronization on CASIO. (Shift-Synchronize, or Start button by cradle.)
•
In case of first synchronization give the name of the synchron table, and the mode of first harmonizing.