Specifications

— 7 —
RECEIVE OK!
TO STOP
PRESS [ ESC ]
DATA
RECEIVE OK!
TO STOP
PRESS [ ESC ]
DATA
8) Set up the slave unit.
Operation : MENU FUNC DATA COM. RECEIVE
OK ESC
OK ESC
If you can not succeed to transfer the data, press ESC key on both unit and try to transfer the data again
according to the above procedure.
9) Set up the customer's unit.
• Turn the power switch off.
• Press the RESET button with a thin, pointed object while shorting the following pad.
Note: Be careful not to reset the customer's unit. If “DIGITIZER” is displayed, turn the power switch off
immediately, and try again.
10) Start the data communication (slave unit).
Operation : OK
BOTTOM VIEW
Short the pad
Enlarge
RECEIVING
ITEMS 00001
SEND ALL DATA ?
OK ESC