User manual - TE_SmartClient_UsersManual

NAURTECH TERMINAL EMULATION & DATA COLLECTION WEB BROWSER FOR WINDOWS CE / WINDOWS MOBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 72
\n
New line
\\
Backslash character
\xYY
where YY is a hexadecimal digit between 00 and FF to represent a
character value
%A
ASCII label type (Symbol or HHP only)
%C
Custom label type, see config
%D
Date
%H
Device manufacturers labeltype as hex value
%I
AIM identifier letter of symbology, will be “*” if unsupported.
%M
AIM modifier digit of symbology, will be “*” if unsupported.
%L
Labeltype, custom (if defined) or same as %H
%T
Time stamp
%%
Percent sign character
\IDA_action\
where IDA_action is a Naurtech proprietary symbolic value that
represents an action. Please refer to the table below for some of the
popular actions.
NOTE: You can use Naurtech proprietary IDA codes for popular operations. You can
specify the IDA_action action using the following format:
\IDA_action\ where IDA_action is an IDA symbolic code.
Some of these are listed in the table below. A full list of IDA codes is available in the
Appendix at the end of this manual
Ref Name Key / Action
IDA_ENTER
Enter key action
IDA_NEWLINE
Newline key action
IDA_ERASE_EOF
Erase to end of field key action
IDA_ERASE_INPUT
Erase input key action
IDA_FIELD_EXIT
Field exit key action
IDA_FIELD_PLUS
Field+ key action
IDA_HOME
Home key action
IDA_DOWN
Down arrow key action
IDA_UP
Up arrow key action
IDA_LEFT
Left arrow key action
IDA_RIGHT
Right arrow key action
Redundancy: This configuration describes the redundancy or linear security level used
during decoding. Default is "Short Twice".
Scan Millisec: This attribute controls the scan duration. If a barcode is not read within
this time, the scanner will shut off and a failure tone is sounded. The default value is 0
which is unlimited. Some scanners do not timeout regardless of this setting.