User manual - TE_SmartClient_UsersManual

NAURTECH TERMINAL EMULATION & DATA COLLECTION WEB BROWSER FOR WINDOWS CE / WINDOWS MOBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 35
Initial Sleep: This is the time, in seconds, which the Naurtech smart client will
wait during startup. This setting is useful when the client automatically starts
during a device cold boot and connects to your host application. The “Initial
Sleep” allows the underlying wireless network to initialize prior to the Naurtech
smart client attempting to establish a connection. The default value is 0, which
means no delay.
NOTE: You will not need to use this setting if you enable the “Check
Network on Connect” setting.
Network
This tab maintains configuration settings to enable detection, presence and availability of
the network.
Windows Mobile Windows CE
Timeout: This is the length of time for which CETerm will try to find the host by
sending multiple ping requests. You can specify a navigation error page in the
Action setting to manage RF connection loss. You can also use the Scripting
event "OnNavigateError", to recover when RF is lost during a navigation or if web
server is not responsive. See the Scripting Guide for details.
Host: This is the URL or IP address of the host server that you would like to
check to determine presence of network and availability of the host server. This
may be different from the URL or IP address of the host to which you are
connected.
NOTE: If this Network -> Host setting is blank, the network check extracts the
hostname from the pending connection URL and sends an ICMP Ping to
determine if the path to the host is available. This effectively checks if the RF is
available, the device is associated, any security protocols are established, and