User manual - TE_SmartClient_UsersManual

NAURTECH TERMINAL EMULATION & DATA COLLECTION WEB BROWSER FOR WINDOWS CE / WINDOWS MOBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 31
Configuration
This section describes various configuration parameters for host connections. All these
parameters are set using the configuration dialogs accessed from the [Session]
[Configure] application menu. Except for "Connection" parameters, you can change or update
any parameters at any time, whether the host / browser session is connected or disconnected.
All configuration attributes are associated with the currently active session. Every session can
have a different set of configuration attributes.
NOTE: The positioning of some of the user interface widgets on the dialogs shown might
appear slightly different on your device. This is because Windows CE devices come in various
screen form factors and the placement of the user interface widgets is performed dynamically,
based upon the device screen dimensions and characteristics.
CONNECTION
The diagram below shows the hierarchy of configuration attributes for the Connection
configuration attributes. Each title represents a configuration dialog tab.
Before you make a connection to your host or web server application, at a minimum, you must
know the host name, IP address or URL and the port number of the host system to configure your
host session.
• From the application menu, Select [Session][Configure] or tap the "Configure"
button
on the toolbar.
• A "Configure" dialog box will come up.
• Choose the "Connection" tab. This is the first (and default) tab.