User Manual

Editing a Tone (User Tones)
EN-17
LFO Low Frequency Oscillator. This is a group of editable LFO parameters
applied to the pitch of a layered tone. For details, see the melody tone
“LFO” (page EN-8).
• For details about the setting items below, see the melody tone “LFO”
(page EN-8). You can input a value in the range from 0 to 127.
Pitch Rate, Pitch Delay, Pitch Rise, Pitch Mod.Depth, Filter Amp Rate,
Filter Delay, Filter Rise, Filter Mod.Depth, Amp Delay, Amp Rise,
Amp Mod.Depth
• For details about the setting items below, see the melody tone “LFO”
(page EN-8). The setting range of each “Depth” is –128 to 0 to +127.
Pitch Wave, FilterAmpWave, Pitch Depth, Filter Depth, Amp Depth
Portamento Portamento. This is a group of editable portamento parameters.
• For details about the setting items below, see the melody tone
“Portamento” (page EN-9).
Portamento On/Off, Portamento Time
Chromatic Chromatic. When “On”, passage from one tone to another is in half-tone
steps when using Portamento.
Off, On
Pan Pan. This is a group of editable parameters associated with pan (sound
stereo position) operation. For details, see the melody tone “Pan” (page
EN-9).
• For details about the setting items below, see the melody tone “Pan”
(page EN-9).
Dynamic Panning, Pan Position
Display Name Description Settings