User Manual

Parameter MSB LSB Notes
Layer On/Off 5XH 00H Note1
Octave Shift 5XH 01H Note2
Pitch LFO Depth 5XH 02H
Filter LFO Depth 5XH 03H
Amp Volume 5XH 04H
Amp Pan 5XH 05H Note3
Amp LFO Depth 5XH 06H
DSP On/Off 5XH 07H Note1
Note: X 0 through 5 correspond respectively to Layers 1 through 6.
Note1: For information about the relationship between setting values and send/receive values, see “26.2 Off/On Setting Value
Table” in “VII Setting Values and Send/Receive Values” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “26.27 Octave Shift Setting
Value Table” in “VII Setting Values and Send/Receive Values” of this document.
Note3: For information about the relationship between setting values and send/receive values, see “26.5 Pan Setting Value
Table” in “VII Setting Values and Send/Receive Values” of this document.
Hex Layer Detune
Parameter MSB LSB Notes
Detune 56H 00H Note1
Note1: For information about the relationship between setting values and send/receive values, see “26.26 Hex Layer Detune
Setting Value Table” in “VII Setting Values and Send/Receive Values” of this document.
7.26 RPN (64H,65H)
Message Format: BnH 64H llH (LSB)
BnH 65H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
7.26.1 Pitch Bend Sensitivity
Message Format: BnH 64H 00H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value(00H - 18H)
ll: LSB Value(Transmit:00H, Receive:Ignored)
Transmit Sent when Bend Range of any part is changed.
Receive Receipt changes Bend Range of the corresponding part.
17