User Manual

4
■ Addition of Decay Time Key Follow for Hex Layer tones
(MZ-X500 only)
Addition of decay time key follow for Hex Layer tones by this version results in addition of the parameters shown
below.
■ Enhanced volume adjustment function for Drawber Organ tones
■ Addition of a Percussion Mode for Drawber Organ tones
(Both MZ-X500 and MZ-X300)
The drawbar organ parameters shown below are added by this version.
• The Leakage Noise setting of Version 1.0X has been changed to the Running Noise setting for this version.
■ Addition of user samples to the Inst Select (instrument selection) of Drum tones
(Both MZ-X500 and MZ-X300)
This change makes it possible to use the Inst Select item on the drum sound editable tone parameter screen to
specify user samples loaded from a USB flash drive or recorded with the pad sampling function.
• Note that only user samples for which Short is specified as the Length can be specified for a drum sound.
Display Name Description Settings
Filter >Enter This is a group of editable filter parameters.
Decay Time Key
Follow
Adjusts the amount of change in the filter envelope decay time between
neighboring keyboard keys. A greater value represents greater change.
Increases the value shortens the decay time of the keyboard’s high range,
and lengthens the decay time of the low range.
–64 to 0 to +63
Amp >Enter This is a group of editable amp parameters.
Decay Time Key
Follow
Adjusts the amount of change in the volume envelope decay time
between neighboring keyboard keys. A greater value represents greater
change.
Increases the value shortens the decay time of the keyboard’s high range,
and lengthens the decay time of the low range.
–64 to 0 to +63
Display Name Description Settings
Volume Controls drawbar organ overall volume. 0 to 127
Click Level Sets the click volume. 0 to 15
Percussion Mode Specifies how percussion is sounded.
Select “Mono” for monophonic sound, or “Poly” for polyphonic sound.
Mono, Poly
Noise >Enter This is a group of editable noise parameters.
Running Noise Specifies the volume of the tone wheel signal (Running Noise) that is
always being generated while nothing is being played.
0 to 15
Tone Wheel
Leakage
Specifies the volume of signal leakage from other tone wheels (Tone
Wheel Leakage Noise) while something is being played.
0 to 15
Drawbar Leakage Specifies the volume of signal leakage from drawbars (Drawbar Leakage
Noise) that are set to level 0.
0 to 15