User Manual

Editing a Tone (User Tones)
EN-23
Auto Wah This is a “wah” effect that can automatically shift the frequency
in accordance with the level of the input signal.
Input Level Adjusts the input level. The input signal can become distorted
when the level of the sound being input, the number of chords, or
the Resonance value is large. Adjust this parameter to eliminate
such distortion.
0 to 127
Resonance Adjusts the strength of feedback. 0 to 127
Manual (X) Adjusts the wah filter reference frequency. 0 to 127
Depth (Y) Adjusts the depth of the wah in accordance with the level of the
input signal.
Setting a positive value causes the wah filter to open in direct
proportion with the size of the input signal, producing a bright
sound. Setting a negative value causes the wah filter to close in
direct proportion with the size of the input signal, producing a
dark sound.
–64 to 0 to +63
Wet Level Adjusts the level of the effect sound. 0 to 127
Dry Level Adjusts the level of the direct sound. 0 to 127
Distortion Distortion + Wah + Amp Simulator
Dist Gain (Y) Adjusts the distortion input signal gain. 0 to 127
Dist Level Adjusts the distortion output level. 0 to 127
Dist Low Adjusts the distortion low-range gain. 0 to 127
Dist High Adjusts the distortion high-range gain. 0 to 127
Wah Type Specifies the wah type. LPF, C-Wah, V-Wah,
Fat Wah, Light Wah,
Heavy Wah
Wah Depth Adjusts the depth of the wah in accordance with the level of the
input signal.
–64 to 0 to +63
Wah Manual (X) Adjusts the wah filter reference frequency. 0 to 127
Routing Specifies the distortion and wah connection. Dist, Wah, Wah-Dist,
Dist-Wah
Amp Specifies the amp simulation type. Bypass, PR Combo,
RV Combo, JC Combo,
TW Combo, DX Combo,
AC Combo, MT Combo,
BG Combo, MS Stack,
TR Stack, SL Stack,
RF Stack, EV Stack,
Bass Combo1,
Bass Combo2, Bass Stack
Wet Level Adjusts the level of the effect sound. 0 to 127
Dry Level Adjusts the level of the direct sound. 0 to 127
DSP type/Parameter Description Settings