User Manual

You can display the Windows standard files by pressing the referring

button and select desired application and then register it in each of one

touch operation buttons. If you do not register the application in the

button, leave the textbox vacant. In this case, the application does not

start up even when you press the button. In the default setting, the

“Microsoft Outlook Express”, the “Internet Explorer” and the “Note pad”

are registered in the “Mail button”, the “Internet button” and “Memo

button” respectively.

Wake On Timer Setting

You can specify the way to restore from the Sleep Mode by putting the

check mark

in the check box.

In the Sleep Mode (the Standby Mode or the Hibernation Mode), this

unit can be restored from the mode when the day and time you set

comes.

Power Management Setting

This allows you to prolong the using time of the battery pack when you

change the settings of the Sleep Mode, CPU, hard disk and the LCD

monitor and the power supply according to the conditions. (This function

is called “Power Management”.)

To make the change of the using condition easier, the three modes of

“FULL POWER”, “NORMAL” and “ECONOMY” are provided. And, for

the power, the two modes of “USER AC” and “USER DC” are provided.

The three modes and the two modes can be specified respectively. The

following items can be specified. In this window, the power management

setting for the system and the devices can be specified by selecting

“USER AC” or “USER DC”, and the setting for this unit can be specified

by selecting “FULL POWER”, “NORMAL” or “ECONOMY”.

• The time until this unit enters the Sleep Mode after the unit is not

used.

• The speed of CPU (Long-Run setting)

• The time until the function of hard disk stops after the unit is not used.

• The brightness of the display

• The time until nothing is displayed in the LCD monitor after the unit is

not used.