User Manual

100
Starting up from the “Product Recovery CD-ROM”
Though FIVA is preset to start up from its hard disk, you can start up
FIVA from “Product Recovery CD-ROM” in a CD-ROM drive to restore
the system and applications. The following procedure is performed with
the CD-ROM.
1. Turn off FIVA and disconnect all peripherals.
2. Connect the CD-ROM drive.
3. Insert the “Product Recovery CD-ROM” into the CD-ROM drive.
4. Turn on FIVA.
5. The CASIO logo appears.
6. Press
F2
a few times. The CASIO logo screen changes to the “BIOS
Setup Utility” screen.
7. Select Exit using the → key, and select Load Setup Defaults in
third line, and then select
Yes
.
8. Select Boot using the → key, press
Enter
, and then select Enabled.
After that, press
Enter
.
9. Select Exit using the → key, and select
Yes
.