User Manual

Performing Merge Printing

For details about merge printing, see "Using Merge Print" (page 45).

1 On the Merge (M) menu, click Merge Print (P)....

•

You could also click Merge Print (P)... on the File (F) menu.

Print start

record

Print end

record

2 Conﬁgure the setting of each item.

3 Click Properties (P)....

4 Conﬁgure the setting of each item.

5 Click OK.

6 Conﬁgure number of copies, options, and other settings.

7 Connect the printer to your computer.

•

Put the printer into the data communication mode.

8 Click OK.

•

This starts printing.

•

To stop printing, click “Printing cancelled” on the Printer menu of

the print spooler screen.

•

To merge print one particular record, perform the steps below.

(1) Use merge preview to display the record you want to print in

the label layout.

(2) Print normally. For details, see "Printing a Label" (page 61).

You can print a single record even if you speciﬁed values for the

print start record and print end record on the screen under step 1

of the procedure.