User Manual

42
Deleting a Bar Code Field
1 Click the bar code field you want to delete.
2 On the toolbar, click .

You could also press the Delete key.
 
This deletes the bar code field.
Inserting a Frame
This software comes with various built-in frames that can be inserted into
layouts.
The two methods that can be used to insert a frame are described below.

On the toolbar, click
and then select a frame.

From the Panel, select a frame as an image to insert it (page 31).
The procedure below explains how to insert a frame by clicking
on the toolbar and then selecting a frame.
1 On the toolbar, click .

You could also click Insert Frame (F)... on the Insert (I) menu.

The displayed frame is adjusted to match the label size and
orientation.
2 Click the frame you want to insert.
3 Click OK.

To replace a frame, repeat the above procedure from step 1.

To delete a frame, repeat the above procedure and select a design
that does not have a frame in step 2.

Angle adjustment and other editing is not possible for a frame
that is inserted by clicking
on the toolbar.

A frame that is inserted as an image from the Panel can be
edited just like any other image field (page 33).