User Manual

39
Deleting a Figure Field
1 Click the figure field you want to delete.
2 On the toolbar, click .

You could also press the Delete key.

This deletes the figure field.
Inserting a Bar Code or Two-
dimensional Code
This section explains how to insert a bar code or two-dimensional code
into a label layout.
Confirm that the layout screen is displayed.
For information about the layout screen, see "BA-300 Basic Operations"
(page 10) and "Layout Creation Screen" (page 15).
1 On the toolbar, click .

You could also click Insert Barcode (B) on the Insert (I) menu.

This displays a menu of supported bar codes and two-dimensional
codes.
2 Select type of code you want to insert.

The bar code types below are supported.
EAN-13, EAN-8, UPC-A, UPC-E, ITF, CODE39, NW-7(CODABAR),
CODE128, GS1-128, GS1 Databar, QR Code, PDF417, Data
Matrix
3 After configuring the required settings, input the numbers and/or
letters of the bar code.

Depending on the bar code type, you can input control codes and
other digits.

The setting items are different for each code type.