User Manual

34
Configuring Monochrome
Settings
This setting specifies how a color image is converted to monochrome for
printing.
You can also adjust the density of the image.
1 On the File (F) menu, click Model setting (R)....

This displays the Label Printer Properties screen.
2 Click Monochrome.
3 Specify the monochrome conversion method to use.

The examples below show the result of each setting when printing
black figures on a white tape.
Nearest Color (N)
Pattern (P)
Error Diffusion (D)
Makes light colors white and dark colors black.
Best for printing line drawings and text data.
Make dark colors a dark shade and light
colors a light shade.
Make dark colors a dark shade and light colors a
light shade. Produces an image similar to that of
a copy machine. Printing takes more time than
Pattern, but the printed results look better.

You can drag the Gamma (I) slider to adjust the density of the
inserted image. Note that adjustment is not supported with
Nearest Color.
4 Click OK.

This setting affects the printed image only. The image shown in the
workspace does not change.