User Manual
33
Replacing an Image and
Modifying Image Properties
This section explains how to perform the following image field operations:
replace an image with another one, modify field properties (size and
angle), and delete an image field.
For details about fields, see "Using Fields" (page 24).
Replacing the Image in a Field
You can use the procedure below to replace the image in an image field
with a different one.
1 Double-click the image field.
This displays the Insert Image screen.
2 Select the file name of the image you want to insert.
3 Click Open (O).
Deleting an Image Field
1 Click the image field you want to delete.
2 On the toolbar, click .
You could also press the Delete key.
This deletes the image field.
Adjusting the Size and Angle of an Image
You can change the size and angle of an image by adjusting the
size and angle of its image field.
For information about how to adjust these properties, see
"General Field Operations" (page 25).