User Manual

32
Capturing a Computer Screen Image
Use the procedure below to capture an image of your computer screen
for use as image data.
Caution!
The capture operation may not work correctly if your computer is running
Windows 10 or Windows 7 SP1 with Aero enabled.
1 On the BA-300 application title bar, click .

This minimizes the BA-300 window.
Click here.
2 Display the screen you want to capture.
3 On the Windows taskbar, click (BA-300).

This returns the BA-300 window to its normal size.
Click here.
4 On the Insert (I) menu, click Capture Image (C).

This minimizes the BA-300 window.

To cancel the capture operation, press the Esc key.
5 Drag your mouse pointer from the upper left corner down to the
lower right corner of the area you want to capture.
This will surround the area
you dragged across with a
selection boundary.
Guidelines that correspond to the size
of your label layout will also appear on
the screen.
The area you dragged across is inserted into the label layout.

The captured area is inserted as image data.

If you drag across and area that is larger than that shown by the
guidelines, re-size the captured image just as you would re-size a
normal image (page 25).