User Manual

13
Layout Creation Flow
This section provides you information about the general flow of label
layout creation using the BA-300 application.
Specifying the Layout Size
Creating a Label Layout
The layout shapes and sizes you can specify for a label depends on
the model of the printer you are using for printing.
•
Specifying the Connected Printer Model (right-hand column of this page)
•
Creating a New Label Layout (page 14)
•
Using a Sample to Create a Layout (page 15)
You can create a label layout by arranging its various fields.
Figure field (page 36)
Text field (page 26)
Image field
(page 31)
Layout
complete!
•
You can also use a bar code field (including a two-dimensional
code field) (page 39).
Specifying the Connected
Printer Model
Use the procedure below to specify the model of printer that you plan to
use to print the label layouts you create with the BA-300 application.
Important!
The label sizes you can use for label layout depend on the specified
printer model. Make sure that the correct printer model is specified before
you start creating a label layout.
1 On the File (F) menu, click Model setting (R)....
2 Specify the printer model name and printer to be used.
Specifying the KL-G2 Printer
Click the down arrow button to display a list of printer models.
•
For the KL-G2 Printer, select CASIO KL-16H_EN for Printer.
3 Click OK.