User Manual

24
8 When all of the settings are the way you want, click OK.
9 On the paint editing screen, edit the data.
10 After you are finished editing, click the Paint button. In the Print item
area, click Print.
11 Click Print.
■ Printing a Newly Created Document
The example below shows how to create a label with the setup below on
a KL-G2 Printer.
18mmTAPE
Horizontal Length: 70 mm
Margin: Medium
1 Click the Paint button and then click New.
2 Click the Paint button. In the Print item area, click Print.
3 Use Select Printer to select CASIO KL16H_EN.
4 Click Preferences.
5 Click the Main Settings tab and then specify the tape you will use.
●
Example Printing Preferences
Main Settings Tab
Select Tape: 18mmTAPE
Tape Direction; Horizontal
Option Tab
Cut Style: Medium
Cut Style: Half Cut/Full Cut
6 After you are finished configuring settings, click OK to return to the
printer selection dialog box. Next, click Apply and then Cancel.
7 Click the Paint button. In the Print item area, click Page Setup. On
the Page Setup dialog box that appears, configure margin value
settings.
●
Margin Setting Example
Left: 10 mm Top: 1 mm
Right: 10 mm Bottom: 1 mm
•
The size of the margins will change in accordance with the tape
type and printing direction. For more information, see "Margin
Settings" (page 19).
8 When all of the settings are the way you want, click OK.
9 In the Image group of the Home tab, click Resize and then specify
a value.
●
Example Settings
Maintain aspect ratio: Off
By: Pixels
Horizontal: 400
Vertical: 128
10 When all of the settings are the way you want, click OK.
11 On the paint editing screen, input the data you want.
12 After you are finished inputting data, click the Paint button. In the
Print item area, click Print.
13 Click Print.