User Manual

23
Printing from Paint
Printing from Paint can be performed by creating a tape using a format
downloaded from the net, and by creating a tape with new image data.
Important!
When actually printing a label, a tape cartridge of the width you specified
must be loaded in the printer.
■ Using a Sample Format to Print
1 On the File tab, click Open. In the downloaded Samples folder,
open 18mmFRAGILE.bmp.
•
This displays a bitmap image.
2 Click the Paint button. In the Print item area, click Print.
3 On the print dialog box that appears, use Select Printer to select
CASIO KL16H_EN, and then click Apply.
4 Click Preferences, and then configure the print settings on the Main
Settings tab and Option tab.
●
Example Printing Preferences
Main Settings Tab
Select Tape: 18mmTAPE
Tape Direction: Horizontal
Option Tab
Cut Style: Half Cut/Full Cut
Margin: Small
5 After you are finished configuring settings, click OK to return to the
printer selection dialog box. Next, click Apply and then Cancel.
6 Click the Paint button. In the Print item area, click Page Setup.
7 On the Page Setup dialog box, configure the margin value settings.
●
Margin Setting Example
Left: 3 mm Top: 1 mm
Right: 3 mm Bottom: 1 mm
•
The size of the margins will change in accordance with the tape
type and printing direction. For more information, see "Margin
Settings" (page 19).