User Manual

19
The tape width and length that are specified with the printer
properties are used as-is for the vertical and horizontal dimensions
of an application's paper size.
The printer driver settings allow specification of the margin settings
Small, Medium, and Large, but applications specify margin using
number input.
Also, margin values depend on the width of tape being used.
•
Refer to Tables 1 and 2 below when configuring margin settings.
Table 1: Tape Width (6, 9, 12, 18, 24 mm) and A Value
Tape Width A (mm)
6mm 1.00
9mm 1.00
12mm 1.00
18mm 1.00
24mm 4.00
Margin Settings
Table 2: Tape Margin Setting and B Value
Margin Setting B (mm)
Small 3
Medium 10
Large 19
●
Example: Setting margins for Microsoft Word
18mmTAPE; Margin: Small; Tape Direction: Horizontal
Margin settings are as shown below when the above printer
properties are configured.
Top and bottom margins (Table 1): 1 mm
Left and right margins (Table 2): 3 mm