User Manual

1
Important!
The copyright of this manual and rights related to the software all revert
to CASIO COMPUTER CO., LTD.
•
Microsoft, Windows, Excel, and PowerPoint are registered trademarks
or trademarks of Microsoft Corporation of the United States in the
United States and other countries.
•
Other company names and product names used herein are trademarks
or registered trademarks of others. Note that TM and ® marks are not
used within the text of this manual.
•
For operation procedures and other information about Windows and
other applications, refer to the user documentation that comes with
them.
•
Except as required for proper use or for creating backup copies, any re-
production of this manual and/or the program, either in part or in their
entirety, is strictly forbidden without the express written permission of
CASIO COMPUTER CO., LTD.
© 2017 CASIO COMPUTER CO., LTD.
Precautions when Printing
•
Avoid using the printer in any location where any of the following is
present: exposure to direct sunlight, high humidity, static electric
charge, extreme temperature fluctuations, extreme temperatures. The
operating temperature range of the printer is: 10°C to 35°C (50°F to
95°F).
•
Do not disconnect the AC adaptor or USB cable from the printer while
printing is in progress.
•
Before starting a print operation, check to make sure that there is
enough tape remaining in the Nameland tape cartridge you are using.
Repeatedly performing the cut operation when there is no tape loaded
in the printer can lead to damage.
•
Be sure to remove any tape residue or other foreign matter that may be
present on the printer's rubber rollers.
•
Do not stick your fingers into the cuter or touch it with your hand. Doing
so creates the risk of personal injury. It also can cause malfunction of
the printer.
•
Do not allow paper clips or pins to get into the printer.
•
Do not subject the printer to strong impact.
•
Do not forcibly pull tape out of or push it back into the printer.
•
Using the printer in a location exposed to strong direct sunlight can
cause malfunction of the printer's internal light sensor, resulting in
display of error messages.