User Manual

14
■ Registering a Custom Tape
You can use the settings on this screen to create a new size tape, which
is added to the Selected Tape (T) list of the Main Settings screen.
You can also delete a custom tape (layout) and change its settings as
required.
To display this screen, click Custom Tape (F)... under Selected Tape (T)
on the Main Settings screen.
6
1
8
3
4
5
7
2
1
Tape Name (F) Input the name you want to use for a tape
you create. The name you input here will
appear in the tape selection list on the Main
Settings screen. To select a previously
created tape, click .
2
Width (W), Length
(Q)
Specify the width and length of the tape you
are creating.
3
Tape Direction
Horizontal (L),
Vertical (P)
Select the direction of the tape you are
creating.
This setting corresponds to Tape Direction
on the Main Settings screen.
4
Tape Used (R) Select the size of the tape to be printed to.
5
Split Direction
Horizontal (T),
Vertical (S)
Select a split direction.
This setting corresponds to Split Direction
on the Tape Layout screen.
6
Add (A) Registers the created tape size and adds it to
the Select Tape list.
7
Update (U) Updates the custom tape specified by Tape
Name with the current settings on the dialog
box.
8
Delete (D) Deletes the custom tape specified by Tape
Name.