User Manual

9
■ Main Settings
Use this table to configure the following basic settings: Select Tape,
Tape Direction, Copies.
1
3
7
4
5
6
2
1
Select Tape (T) Specifies the tape to be used.
2
Width (W), Length
(Q)
Changes the width and length of the
specified tape. Note that changes to this
setting are not saved. To add a new tape
size, use Custom Tape to register the new
tape size.
3
Custom Tape (F)... Displays a dialog box for registering a custom
tape. You can create a new size tape or add
to the Select Tape list (page 14).
4
Horizontal (B),
Vertical (L)
Specifies the page orientation of the selected
tape. However, note that even if you change
the page orientation, the actual printing
direction is fixed, and orientation of the text
and graphics within the print area is does not
change.
5
No. of Copies (C)
Specifies the number of copies to be printed.
6
Print Copies (E) When printing multiple copies of a document,
select this check box to print one complete
copy of the document, following by the next
complete copy, etc.
7
Restore Previous
(X)
Restores settings to what they were before
you changed them.
Important!
Specifying Paper with Select Tape
The paper size specified by the application and the paper size specified
by Select Tape (T) must be identical. Abnormal printing may result if the
sizes are different.
•
See "Printing a Tape from an Application" (page 16) for a variety of
examples of settings from applications