User Manual
45
3 Confi gure the setting of each item.
Printer shows the model name of the printer to be used for
printing.
If text or fi gures on actual print results are smudged or too dense,
adjust the print density.
4 Click OK.
5 Confi gure number of copies, options, and other settings.
Under Cut Style, specify the tape cut method you want to use.
Select Half Cut/Full Cut, Full Cut Only, or No Cut.
With Half Cut/Full Cut the printer cuts only the tape part, without
cutting the backing paper when multiple labels are printed.
With this setting, margins between labels are narrower, which
saves tape.
Select No Cut when printing on refl ective tape, magnetic tape or
iron-on fabric tape.
Select Full Cut Only or No Cut when printing on iron-on transfer
tape.
Changing the printer model may cause the Cut Style setting to be
changed automatically.
To perform mirror image printing, select the Print Reversed check
box.
•
•
•
•
•
•
•
•
6 Connect the printer to your computer.
Put the printer into the data communication mode and confi rm that
it is displaying the READY TO TRANSFER DATA message.
7 Click OK.
This starts printing.
To stop printing, click “Printing cancelled” on the Printer menu of
the print spooler screen.
To print a large label, you can print parts to multiple pieces of tape
and then assemble them into the fi nal label. For more information,
see "Printing a Label Larger than the Tape Cartridge Width"
(page
48).
Important!
Tape cutting is not performed when the tape length is one of those
shown in the table below. In this case, you can use scissors or some
other implement to cut the tape after printing is complete.
Model Margins: Small Margins: Medium Margins: Large
KL-G2
Approximately 28 mm
(1-
1
/
8
") or less
Approximately 35mm
(1-
3
/
8
") or less
Approximately 45mm
(1-
3
/
4
") or less
CW-L300
Approximately 30mm
(1-
3
/
16
") or less
Approximately 37mm
(1-
7
/
16
") or less
Approximately 49mm
(1-
15
/
16
") or less
The display settings of your computer and/or the zoom factor selected
with the FA-3000 application's Zoom setting can cause misalignment
of label text and other problems. Be sure check the print preview image
before printing.
•
•
•
•
•
•