User Manual

36
Selecting Fields
The fi rst step is to select the fi elds to be aligned or size matched. After
that, you need to select the reference fi eld.
1 Drag your mouse pointer across a range that includes all of the fi elds
you want to align. Alternately, you could hold down the Shift key as
you click each of the applicable fi elds, one by one.
The currently selected fi elds become surrounded with a gray
boundary. The fi eld with the handles is the current reference fi eld.
Important!
When you perform a drag operation to select fi elds, a fi eld will not be
selected if any part of it is outside of the area you select. Make sure you
entirely enclose all of the fi elds you want to select.
Selected fi elds Reference fi eld
(the fi eld with handles)
2 To select a different reference fi eld, hold down Ctrl as you click the
desired fi eld.
Handles will appear around the fi eld you click, indicating that it is
now the reference fi eld.
•
•
Positioning and Size Matching Fields
After you select the desired fi elds, you can align or size match them.
1 Perform the operation required to align or size match the selected
fi elds.
You can use either the Alignment menu or icon operations to align
or size match fi elds.
Alignment Menu (pages
14 and 15)
Toolbar (Tool Icons) (pages 16 to 17)
2 To deselect the fi eld, click anywhere outside of the grey boundary.
•
•
•