User Manual

33
4 Click OK.
This inserts a bar code fi eld along with a bar code or two-
dimensional code that corresponds to your input.
Printing Bar Codes or Two-dimensional Codes
You should confi rm that a printed bar code or two dimensional
code can be read correctly before actually using it. If a bar code
cannot be read correctly, make the adjustments below.
Lighten the print density (page 44).
Increase the bar code size (page 34)
The tapes below are suitable for bar code and two-dimensional
code label printing.
Black lettering on white tape (WE)*
Blue lettering on white tape (WEB)*
Black lettering on yellow tape (YW)*
* The letters in parentheses indicate the tape model number.
Position a bar code fi eld so its left edge is at least 21mm (
13
/
16
")
(26mm (1") for the CW-L300) from the left edge of the tape.
•
■
•
•
•
Editing a Bar Code or Two-
dimensional Code, Modifying
Bar Code Field Properties, and
Deleting a Bar Code Field
This section explains how to perform the following bar code fi eld operations:
edit letters and numbers, modify fi eld properties, delete the fi eld.
For details about fi elds, see "Using Fields" (page
20).
Editing Letters and Numbers in a Bar Code Field
Use the procedure below to re-input the letters and numbers in a bar
code fi eld.
1 Double-click the bar code fi eld.
This displays the Insert Barcode screen.
2 Re-input the letters and numbers for the bar code.
3 Click OK.
•
•