User Manual

31
You can also insert a fi gure using the steps below.
1. Click Insert Figure on the Insert menu, or click the
icon.
2. Use Types of Figure to select the type of fi gure you want to use.
3. Click the fi gure you want to insert.
4. Click OK.
•
Replacing a Figure and
Modifying Figure Properties
This section explains how to perform the following fi gure fi eld operations:
replace a fi gure with another one, modify fi eld properties (illustration line
and color, fi eld size and angle), and delete a fi gure fi eld.
For details about fi elds, see "Using Fields" (page
20).
Replacing the Figure in a Field
You can use the procedure below to replace the fi gure in a fi gure fi eld
with a different one.
1 Double-click the fi gure fi eld.
This displays the Insert Figure screen.
2 Click the fi gure you want to insert.
3 Click OK.
Modifying Figure Field Properties
You can use the procedures in this section to change the line thickness
and color of an inserted fi gure.
1 Click the fi gure fi eld whose properties you want to modify.
Modifying fi gure properties without fi rst selecting a fi gure fi eld
will cause the properties to be applied to the next fi gure fi eld you
insert.
•
•
•