User Manual

29
Saving an Image to and Deleting
an Image from the Image Panel
Once you save an image to the image panel, you can re-use it whenever
and as many times as you like.
This section explains how to save an image to the image panel and how
to delete an image from the image panel.
Saving an Image to the Panel
With this procedure, the image you want to save to the panel should
already be inserted in the workspace.
1 For the panel type, select Image.
This displays the image panel.
2 Select the panel name and display the panel where you want to save
the image.
3 While holding down Alt on your keyboard, drag the image you want
to save from the workspace to the panel.
4 Clicking or double-clicking the New bitmap area will move the
cursor there. Input a name for the saved image and then press
Enter.
•
Deleting an Image from the Image Panel
Saving an image to the image panel stores it as a fi le on your computer
with the name shown under the image on the image panel, in a folder
with the same name as the panel name.
Panel name
(folder name)
File name
Deleting an image from the image panel deletes the fi le from the folder.
1 Exit the FA-3000 application.
2 Use Explorer to open the folder where images are stored.
For example, sample images are stored in the following folder:
/Program Files(X86)/CASIO/FA-3000/DATA/Graphics/(panel name)
Note that the folders above (to the left of) FA-3000 will be different
on your computer, depending on where you installed the FA-3000
application.
Example: To delete an image from the panel named User 1.
•