User Manual

20
Figure fi eld
Bar code fi eld

Important!
Layout the fi elds so they fi t within the layout area. Any part of the label
that is not within the layout area will not be printed.
Layout size (within boundary )
Difference between an Image and a Figure
This manual differentiates between images and fi gures as described
below.
Image: This is an illustration drawn with paint software, or
a digital image recorded with a digital camera, or
downloaded from a website, etc.
In addition to the images that come with this software,
you can import your own digital images or computer
screen shots.
Figure: A fi gure is a square, star, arrow or other sketch or
drawing. This software comes with various fi gures built-
in.
■
Using Fields
A label layout is made up of various fi elds. This section explains the
characteristics of each type of fi eld and the common operations that
apply to all fi eld types.
Four Field Types
Field Types
There are four different types of fi elds that can be inserted into a label
layout.
This type of fi eld: Is for this type of data:
Text fi eld Text
Image fi eld Images
Figure fi eld Figures and illustrations
Bar code fi eld Bar codes and two-dimensional codes
Selecting a fi eld causes it to be surrounded by a light gray boundary as
shown in the nearby illustration. This selection boundary is not printed.
Text fi eld
Image fi eld
■