User Manual

19
Key Operations
This section explains operations you can perform using your computer
keyboard.
The plus symbol (+) is used here to indicate that two keys should be
pressed at the same time.
Example: Pressing both the Ctrl and A key at the same time is shown as:
Ctrl+A.
Shortcut Keys
You can use the shortcut key operations shown in the table below to
perform various operations from your computer keyboard.
Key Operation Function
Delete Deletes the currently selected fi eld.
Ctrl+A Selects all of the fi elds in a layout.
Ctrl+D Duplicates the currently selected range or fi eld.
Ctrl+N Creates a new layout.
Ctrl+O Opens an existing layout.
Ctrl+P Prints a currently displayed layout.
Ctrl+S Saves the displayed layout to its existing fi le.
Ctrl+X Cuts the currently selected fi eld.
Ctrl+C Copies the currently selected fi eld.
Ctrl+V Pastes fi elds that have been cut or copied.
Ctrl+Z Undoes the last operation.
Ctrl++ Zooms in on the screen.
Ctrl+
- Zooms out from the screen.
•
Using Key Operations to Reposition Fields
You can use the computer keyboard operations in the table below to
reposition fi elds in a layout.
Click a fi eld to select it.
Key Operation Function
↑
Shifts the selected fi eld slightly upwards.
↓
Shifts the selected fi eld slightly downwards.
←
Shifts the selected fi eld slightly leftwards.
→
Shifts the selected fi eld slightly rightwards.
Ctrl+
↑
Moves the selected fi eld upwards.
Ctrl+
↓
Moves the selected fi eld downwards.
Ctrl+
←
Moves the selected fi eld leftwards
Ctrl+
→
Moves the selected fi eld rightwards
Tab Jumps forward between fi elds.
Shift+Tab Jumps back between fi elds.
Home
Moves the selected fi eld to the left edge of the label layout.
End Moves the selected fi eld to the right edge of the label layout.
Ctrl+Home Moves the selected fi eld to the upper left edge of the
label layout.
Ctrl+End Moves the selected fi eld to the lower right edge of the
label layout.
•