User Manual

18
Toolbar (Setting Items)
You can click a setting item and change its setting as required.
For information about how to change the connected printer model
setting, see "Specifying the Connected Printer Model" (page 11).
Depending on the tape layout, you may not be able change certain
settings.
①
Connected printer model
②
Label width
③
Label length
④
Number of pieces
⑤
Font name
⑥
Pen type
⑦
Pen color
⑧
Brush start color/
pattern color
①
Connected printer model Shows the printer model name specifi ed
with the procedure under "Specifying the
Connected Printer Model" (page 11).
No printer model name is shown in the
screenshots used in this manual.
②
Label width Specifi es the width of the label.
③
Label length Specifi es the length of the label.
④
Number of pieces Specifi es the number of pieces of tape to be
combined to create the fi nal label using the
layout.
⑤
Font name Specifi es the font for a text fi eld.
⑥
Pen type Specifi es the pen type for fi gure drawing.
⑦
Pen color Specifi es the fi gure and line color.
⑧
Brush start color/pattern color Specifi es the start color for fi gure gradation.
Also sets the pattern color when a fi gure
pattern is specifi ed.
■
•
•
•
Using the Workspace Grid
Use the procedure below to toggle display of the workspace grid
between show and hide.
1 On the Settings menu, click Workspace settings.
2 Confi gure the setting of each item.
3 Click OK.