User Manual

11
Specifying the Connected
Printer Model
Use the procedure below to specify the model of printer that you plan to
use to print the label layouts you create with the FA-3000 application.
Important!
The label sizes you can use for label layout depend on the specifi ed printer
model. Make sure that the correct printer model is specifi ed before you start
creating a label layout.
1 On the File menu, click Model setting.
2 Specify the printer model name and printer to be used.
Specifying the KL-G2 Printer
Click the down arrow button to display a list of printer models.
3 Click OK.
Creating a New Label Layout
Confi guring Tape Layout Settings
1 On the File menu, click NEW.
2 Use the Tape Type box to specify the width of tape for printing.
3 Use the Tape Length box to specify the label length.
4 To create a label layout that is wider than the tape width, use the
No. of Split Sheets box to specify how many tapes the print image
should be split between.
For label layout hints, see page 47.
•