User Manual

10
Saving Changes to an Existing Layout
Use the procedure below to save changes you have made to an existing
layout.
1 Click Save on the File menu, or click the icon.
This saves the layout.
Closing a Layout
1 On the File menu, click Close.
This closes a currently displayed layout.
A confi rmation message will appear if there are unsaved edits to
the displayed layout. Specify whether or not you want to save your
changes.
Exiting the FA-3000 Application
1 On the File menu, click Exit.
This exits the FA-3000 application.
A confi rmation message will appear if there are unsaved edits to
the displayed layout. Specify whether or not you want to save your
changes.
•
•
•
•
•
Layout Creation Flow
This section provides you information about the general fl ow of label
layout creation using the FA-3000 application.
Specifying the Layout Size
The layout shapes and sizes you can specify for a label depends on
the model of the printer you are using for printing.
Specifying the Connected Printer Model (page 11)
Creating a New Label Layout (page 11)
Creating a Label Layout
•
•
You can create a label layout by arranging its various fi elds.
Figure fi eld (page 30)
Text fi eld (page
22)
Image fi eld
(page
25)
Layout complete!
You can also use a bar code fi eld (page
32) and a two-dimensional
code fi eld (page 32).
•