User Manual

9
Opening an Existing Layout
This section explains how to open an existing layout.
A layout created with the FA-3000 application is saved with the fi le
name extension .lyw.
Opening a Layout Created with another Model
Printer
When you open a layout created with another model printer, there may
be some misalignment of layout contents due to differences in margin
lengths and print resolutions.
If this happens, you will need to make adjustments in the layout after
opening its fi le.
1 Click Open on the File menu, or click the icon.
This displays a fi le selection screen.
2 Click the name of the fi le (layout) that you want to open and then
click Open.
This displays the screen of the layout you selected.
•
■
•
•
Saving a New Layout
Use the procedure below to save a new layout. You can also use these
steps to create a copy of an existing layout under a different name.
1 On the File menu, click Save as.
2 Input the fi le name (layout name).
The fi le name extension of a layout fi le is .lyw.
3 After confi rming your input, click Save.
To cancel without saving anything, click Cancel instead of Save.
•
•