User Manual

8
FA-3000 Operation Flow
This section provides you information about the general fl ow of label
creation using the FA-3000 application.
You can arrange text, images, fi gures, bar codes, and two-dimensional
codes as desired as part of a tape layout.
Startup
(page 8)
Specify the printer model.
(page 11)
Specify new layout.
(page 11)
Edit and re-use an
existing layout.
(page 9)
Create layout.
Basic layout (page 8 to 21)
Text (pages 22 to 25)
Images (pages 25 to 30)
Figures (pages 30 and 32)
Bar codes (pages 32 to 35)
Two-dimensional codes (pages 32 to 35)
Screen capture (page
26)
•
•
•
•
•
•
•
Print
(pages 44 to 47)
Exit
(page 10)
Save
(pages 9 and 10)
FA-3000 Basic Operations
This section explains the following the FA-3000 application operations:
starting up FA-3000, opening an existing layout, saving a new layout, saving
changes to an existing layout, closing an open layout, exiting FA-3000.
Starting Up the FA-3000 Application
1 Double-click the icon.
You can also start up FA-3000 by performing the steps below.
（
1
）
Click the Windows Start menu.
（
2
）
Click All Programs, and then align your mouse pointer with
CASIO, Label Printing Software, and then FA-3000.
（
3
）
Click FA-3000. (The folder where FA-3000 is located on your
computer may be different, depending on what you selected
during the installation process.)
Shows printer model name.
No printer model name is shown in the
screenshots used in this manual.
Startup screen
If this is the fi rst time you are using the software, refer to "Layout
Creation Flow" (page 10) to fi nd out what to do next.
•
•