EN KL-G2TC 標籤打印機 User’s Guide Supported Tape Widths 6 mm 9 mm 12 18 24 mm mm mm RJA533744-001V01
Important! Be sure to keep all user documentation handy for future reference.
Important! Except as required for proper use or for creating backup copies, any reproduction of this manual and/or the program, either in part or in their entirety, is strictly forbidden without the express written permission of CASIO COMPUTER CO., LTD. Read This first! x This manual explains how to use the CASIO KL-G2TC Label Printer. x The contents of this manual have been checked at each step along the production process.
Contents Creating an Index Label ................................................................24 Safety Precautions ..........................................................................4 Creating a Large Label by Combining Smaller Parts (Large Label) ..................................................................................27 Precautions during Use ..................................................................7 Part 4 - Free Design Label .............................................
Saving and Recalling Frequently Used Expressions (Phrase Memory) ...........................................................................49 Inserting the Current Date and/or Time into Text ........................50 Copying and Pasting Input Text ...................................................51 Creating a User Character ............................................................51 Part 9 - Printer Settings.................................................................
Safety Precautions Warning Thank you for purchasing this CASIO product. Before using it, be sure to read the following Safety Precautions. Keep the manual in a convenient location for future reference when necessary. Danger This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. Warning This symbol indicates information that, if ignored or applied incorrectly, creates the possibility of death or serious personal injury.
Warning AC Adaptor Before going out, be sure to unplug the power cord/AC adaptor from the power outlet and put it in a place away from objects used by animals and pets. An animal or pet chewing on the power cord/AC adaptor can cause it short, leading to the risk of fire and electric shock. Batteries Continued use of the printer without removing the batteries after they have leaked creates the risk of fire and electric shock.
Caution AC Adaptor/USB Cable Misuse of the AC adaptor/USB cable creates the risk of fire and electric shock. Make sure you observe the points below. x Never locate the AC adaptor/USB cable near a stove or other heating device. x When unplugging from the wall outlet, grasp the AC adaptor/ USB cable plug. Never pull on the AC adaptor/USB cable. x Insert the AC adaptor plug into the wall outlet as far as it will go. x Insert the USB cable plug into the connector as far as it will go.
Caution Unstable Locations Never place the product on an unstable surface, on a high shelf, etc. Doing so can cause the product to fall, creating the risk of personal injury. Loading and replacing batteries The springs inside of the battery compartment have sharp edges. Take care that you do not touch the springs with your fingers when loading or replacing batteries. Doing so creates the risk of personal injury. High temperature precaution The print head and the metal parts around it can become very hot.
Check to make sure that everything has been included with the printer. Label printer Read this before using the printer! About the printer This printer can be used to print labels using either of the two methods below. ① Stand-alone printing with the printer only. x This method lets you take your printer along anywhere your printing needs take you. x Software installation and connection to a computer is not required. ② Connecting the printer to a computer to print.
Printer User Documentation This section explains the user documentation required for using this printer. About the supplied CD-ROM x KL-G2TC User's Guide (This Manual) x Label Printing Software FA-3000 User's Guide Computer Operating Environment (for included PC Link Software) The Label Printing Software FA-3000 User's Guide is in a PDF file on the CD-ROM that comes with the printer. If you are connecting the printer to a computer, view the PDF file on the computer.
Installing the Software 2. Important! x Be sure to install the software on your computer before connecting the Printer. You may experience problems with operation if you install the software after connecting. x Exit all other programs currently running on your computer before installing the software. Installation may not be performed correctly if there is another program running. Select the installation language and then click OK. x This starts the installation process.
4. If a restart message appears, click Yes. x This restarts your computer. x To cancel installation, click Cancel. x Attempting installation while an anti-virus program is running may cause the anti-virus program to display an error or warning message on your computer. If this happens, perform the steps below. 1. After installation is complete, uninstall the printer software. 2. Exit the anti-virus program and all other programs that are currently running on your computer. 3.
Part 1 - Getting Ready Names of Parts and Their Functions ON OFF Display* Keyboard USB port Recessed handle AC adaptor connection terminal Tape outlet Tape compartment Tape compartment cover open button * With backlight that can be turned on or off as required (page 54).
■ Disconnecting the AC Adaptor Power Requirements Your printer can be powered using the specified AC adaptor or by commercially available alkaline batteries. x Before using the printer, be sure to read the information under "Safety Precautions" (pages 4 through 7). x For information about how to load batteries, see page 55. Using the AC Adaptor ■ Connecting the AC Adaptor Important! x Use only the AC adaptor specified for this printer.
The message 通訊準備完畢 (Ready to transfer data) will appear on the printer display after USB driver installation is complete. Connecting the Printer to a Computer Important! Be sure to install the printer software on your computer before connecting the printer to it. 1. Start up Windows and then connect a USB cable* to a USB port on the computer. * Use a commercially available cable (A-microB type) that complies with USB standards.
Turning Power On and Off ■ To turn power on Creating Text for Printing There are three ways that you can create text for printing. x Create new text o Select 新增 (New) and then select the type of label you want to create. Press ON. x For information about how to adjust the display contrast and to change the backlight setting, see page 54. x Recall existing text oSelect 登錄資料 (Stored Data), select 調出 (Recall), and then select the data you want to recall. Main menu ■ To turn power off Press OFF.
Loading and Removing a Tape Cartridge A tape cartridge is required when printing tape labels. You should use only the special tape cartridges that are specified for this printer. x This printer supports the following tape widths: 6mm, 9mm, 12mm, 18mm, 24mm. 4. Check the condition of the tape and the ink ribbon. x Make sure the leading end of the tape is not bent. If it is, use scissors to trim off the bent part. x Make sure the leading end of the tape is passing through the tape guide.
5. Set the tape cartridge in place. x Taking care not to pull on the ink ribbon, pass the tape and ink ribbon between the print head and the rubber roller (illustration below). Press down on the tape cartridge until it clicks securely into place. Main Key Functions ③ ① ④ ⑤⑥ ⑦ ⑧ ⑨ ⑩⑪ ⑫⑬ ⑭⑮ ② Important! An improperly loaded tape cartridge can cause the ribbon to break. Rubber roller ㉜ ⑯ ⑰ ⑱ ⑲ ⑳ Tape ㉛ ㉚ ㉑ Print head 6. Close the tape compartment cover.
Part 2 - Performing a Test Print Display Indicators x For information about how to adjust the display contrast and to change the backlight setting, see page 54. ① ② ③ ④ ⑤ ⑥ Printing a Label Sample Print ⑦ 1. Press ON to turn on power. x This displays the main menu. x A screen including a 上次資料 (Previous Data) (last session's data) option may appear in place in the screen shown here. (page 15) 2. Select 新增 (New) and then press 執行 . 3.
4. Input text. x Here, we will input " 銷售報告 ". x For information about how to input text, see page 42. ■ Configuring Print Format Settings While inputting text, pressing 功能 and then 格式 displays a menu for configuring print format settings (page 29). x Tape length（帶長） x Text direction (vertical, horizontal)（方向） x Mirror printing (enable/disable)（鏡射） ■ Displaying a Print Preview Image You can display a print preview image to get an idea of what your label will look like before actually printing it.
4. 5. Press the arrow key. Specify a cut mode. x Cut modes are explained in the table below. Select this mode: 通常 (Normal) 切斷 (Cut) To do this: Print without cutting the backing paper between labels. Cut between labels. 特殊 (Special Tape) Print on iron-on transfer tape. 不裁切 (Uncut) Print on reflective tape, magnetic tape or ironon fabric tape. Press 執行 . x This starts printing. x The backlight will be unlit while printing is in progress. x To interrupt printing part way through, press 取消 .
Exiting Text Creation and Tape Printing Cut Modes (Auto Cutter) When printing multiple labels during a single print operation, you can configure printer settings that control whether or not there should be an automatic cut between each of them. Depending on the type of tape you are printing, use of the cutter can cause cutter wear and malfunction. 1. When the screen shown above is on the display, select 結束 (Exit) and then press 執行 twice. x This returns to the screen shown below.
■ Four cut modes ■ 特殊 (Special Tape) The printer has four cut modes. x To specify a cut mode, perform step 5 under "Printing a Label" (page 20). x Note that the cut method and margin length depends on the margin settings. x Regardless of the currently selected cut mode, full cutting and half cutting are never performed while 邊距 不留 (Margins None) is specified for the print format (page 30). x Tape cutting is not performed when the tape length is one of those shown in the table below.
Part 3 - Creating a Label Label Creation Basics You can use your printer to create the types of labels described below. x Free design label (page 28) Enter any text you want to include in your label. x Numbered label (page 23) Create labels that include an automatically incremented number. x Index label (page 24) These labels come in handy when managing files, etc. x Bar code label (page 38) Bar codes based on input data can be printed in labels.
Important! Numbered label printing continues for the specified number of copies. To avoid running out of tape during a print operation, check before hand to ensure that the tape cartridge being used has sufficient tape remaining. 1. 2. 3. On the main menu (page 15), select 新增 (New) and then press 執行 . Select 列印編號 (Numbering) and then press 執行 . Select a print format and then press 執行 . x Here we will select 4. Allowable number of input characters Current number of input characters 10.
x To avoid detachment of an index label when it is attached directly to the edge of a document, make sure that the part of the label that attaches to the document is at least 4mm wide. x When affixing index labels to the tabs of commercially available index cards, use of 24mm wide transparent tape, without framing, is recommended. Creating an Index Label Using Canned Phrases You can use the canned phrases built into printer memory to create an index label. 1.
Index Label Canned Phrase List Category Printed Maximum Content Number of Copies A-Z 26 索引 (Index) a-z 26 1 - 99 99 數字 (Numbers) No.1 99 No.99 1~ 10 90~ No.1~ 10 No.90~ 12 月日 (Date) 1 月 12 月 Jan. 12 Dec. 1 月份 12 12 月份 1日 31 31 日 7 星期 星期日 (Day of the week) 星期六 Sun. 7 Sat. 26 EN 1 2 3 4 5 6 7 8 9 A a 1 No.1 B b 2 No.2 C c 3 No.3 D d 4 No.4 E e 5 No.5 F f 6 No.6 G g 7 No.7 H h 8 No.8 I i 9 No.9 1~ 10~ 20~ 30~ 40~ 50~ 60~ 70~ 80~ 10 11 12 J K L j k l 10 11 12 No.10 No.11 No.
Creating a Large Label by Combining Smaller Parts (Large Label) "2 段 (2 pieces)" means "printing is divided between two parts". Printing can be divided among up to four parts. 5. Select 列印 (Print) and then press 執行 . x A preview image (page 19) of the parts that make up a large label cannot be displayed. 6. Specify which of the parts of the label you want to print and then press the arrow key. x Normally select 全部 (All) here. 7. Specify a cut mode (page 21) and then press 執行 .
2. Part 4 - Free Design Label Input the second line of text. Created Label Layout (Imager) Character size adjusted according to number of lines. Creating a Free Design Label with Text You Input 1. 2. 3. On the main menu (page 15), select 新增 (New) and then press 執行 . Select 自由標籤 (Free Design) and then press 執行 . Input the text you want. x Refer to page 19 for information about the printing operation.
1. 2. Input the text for the first block. Specifying the Label Print Format Press 功能 and then press . x This makes the input text a block. You should change the print format in accordance with the label length, character spacing, text alignment, etc. You can change the format of each block and for the overall label. Block indicator (not printed) 3. Input line 1 of the next block's text, press , and then input line 2. Indicates in which block the cursor is currently located.
7. Setting Item Description 方向 (Direction) Specifies either 直排 (Vertical) or 橫排 (Horizontal). 文字排版 (Text Alignment) Specifies alignment ( 靠左 (Left), 等距 (Equal), 置 中 (Center), 靠右 (Right)) of the text within a block. o page 34 文字間隔 (Text Pitch) Specifies the space between characters in the range of 0 to 31.9mm. x The tape length is also adjusted in accordance with the character pitch setting.
Setting Item Description x 自動 (Auto): Automatically adjusts the label length in accordance with the number of characters. 帶長 (Tape Length) x If you want to specify the label length manually, select 固定 (Fix) for this setting. o page 32 Specifies the label overall block alignment. o page 34 區段排版 x This setting is valid only when 固定 (Fix) is (Block Alignment) selected for the 帶長 (Tape Length) setting. Available settings are: 靠左 (Left), 等距 (Equal), 置中 (Center), 靠右 (Right). 5.
8. Specify the length of the block and then press 執行 . x Direct input of values is also supported. x The length of each block and the number of input characters affects how the label is printed. You can check the status of the printout by looking at whether the displayed block length is enclosed in brackets as described below. [6.0cm]: Print will be the specified length. (6.0cm]: Print will be the specified length, but text will be compressed horizontally. 6.
Simple Length Setting for CD or DVD Case Labels (One-touch Length Setting Keys) You can use the one-touch length setting keys for quick and easy specification of the lengths of commonly used labels for CD or DVD cases, files, etc. Onetouch setting simplifies the task of printing multiple labels of the same length. Important! x Use the 帶長 (Tape Length) or 區段長度 (Block-Length) settings to specify the label length when using blocks to lay out the label.
Specifying Text Alignment 8. Select 固定 (Fix) and then press the arrow key. This highlights the value. Specifying Text Alignment within a Block Use the procedure below to specify text alignment within a block. Fixed block length 9. Align left Align center Align right Specify a value that is greater than the original value and then press 執行 . x Direct input of values is also supported.
Important! Note that the block alignment specification is valid only when 固定 (Fix) is selected for the 帶長 (Tape Length) setting. 1. 2. Input text and divide it into blocks (page 28). 3. 4. Select 全文格式 (All Form) and then press 執行 . 5. Press 功能 and then 格式 . x If there is only one block in the label, advance to step 4. Use the screen. and arrow keys to display the 帶長 (Tape Length) setting Select 固定 (Fix) and then press the arrow key.
5. Move the cursor to the first character of the text whose size you want to change and then press 執行 . 6. Move the cursor to the last character of the text whose size you want to change and then press 執行 . Character size factors Size of character at current cursor position Specifying the Character Size for a Specific Line of Text You can use the formats in the table below to specify the character size for a specific line of text.
Number of Lines Format A B 3 C D 24mm, 18mm wide 1×1 1×1 1×1 1×1 1×1 2×2* 1×1 2×2* 1×1 2×2* 1×1 1×1 12mm wide 9mm wide - - - - - - - - * Smaller printing with a frame. Important! You cannot specify the character size for a line of text when any one of the conditions below exists. x When 6mm wide tape is loaded in the printer x When there are more than three lines of text x When a character size is specified for specific characters (page 35) 1. 2. 3. 4.
Part 5 - Bar Code Labels Adding a Frame to a Label You can add one of a variety of different frames (page APP-4) to a free design label. 1. 2. 3. 4. Creating a Bar Code Label Input text. Bar Code Types Press 圖文框 . You can use your printer and the Label Printing Software FA-3000 to create a variety of different bar codes. Select the frame you want to use and then press 執行 . Select 列印 (Print) and then press 執行 .
Important! x Be sure to use a 12mm wide or wider tape cartridge for bar code label printing. x You can input comment text above a bar code (up to 60 characters). x You should confirm that a printed bar code can be read correctly before actually using it. If a bar code cannot be read correctly, make the adjustments below. Lighten the print density (page 54). Increase the size of the print (step 6, page 39). Use 特殊 (Special Tape) or 不裁切 (Uncut) as the cut mode (page 22).
*1 Bar Code Specifications Bar Code Number Number Check of print of input digit*1 digits*3 digits*4 Number of auto appended digits*1 Check digit*1 EAN-13 有 (Yes) 13 12 - 1 EAN-8 有 (Yes) 8 7 - 1 UPC-A 有 (Yes) 12 11 - 1 UPC-E (有 (Yes))*2 6 6 - - - - 4 to 22 digits, even numbers only*5 3 to 21 digits, 4 to 22 odd 有 (Yes) digits numbers only*6 4 to 22 2 to 20 無 (No) digits digits 無 (No) ITF CODE39 CODABAR (NW-7) 40 EN 4 to 22 digits Input characters*8 Numbers (0 to 9) Numbers (
Part 6 - Storing and Recalling Label Data Storing Label Data 3. Inserting a Built-in Logo into a Label The printer has a number of built-in labels that include logos and text for retail and office use that you can print. You can use the screen that appears after text input is complete to assign a name to the data and save it in printer memory. 1. 2. Part 7 - Using a Built-in Logo Sample Print After you finish inputting text, select 登錄 (Store) and then press 執行 .
4. 5. 6. Part 8 - Inputting and Editing Text Select the print size, enable or disable mirror image printing, and then press 執行 . x You can also print multiple tapes and later assemble them into a large label. For information about print sizes, see page 42. x When printing a large label, select 放大 2 段 (2 pieces) (two tapes), 放大 3 段 (3 pieces) (three tapes), or 放大 4 段 (4 pieces) (four tapes). This section explains basic text input and editing operations.
■ To enter the English input mode Display Screen and Input Mode 1. Chinese Input Mode English Input Mode x Zhuyin ( 注 ) x English lower-case ( 英 ) x Cangjie ( 倉 ) x English upper-case ( 英 ) x Pinyin ( 北 ) Press a/A. x If you are currently in the Chinese input mode, the above operation will return to the input mode (upper-case ( ) or lower-case ( )) that was selected when you were last in the English input mode.
4. 5. Inputting Chinese Using the Pinyin Input Method Press ㄏㄠ . ˇ Press . x This displays 好 . x You can select a different character by pressing 選字 . After selecting the character you want, press 執行 . Inputting Chinese Using the Cangjie Input Method With the Cangjie input method, combinations of radicals input by you are converted to Chinese characters. 4. 5. Press 女弓木 . or ) to 倉 . Press 人弓火 Press 變換 / 空白 . x This displays 你 .
Inputting English Characters Inputting Illustrations Keys Used for English Input The printer has a collection of built-in illustrations divided between two groups. For information about available illustrations and their groups, see the illustrations table (page APP-2). x Character styles are not applied to illustrations. 1. Press . Illustration group name 1. Press the key that corresponds to the character you want to input. x Press a/A to toggle between upper case ( ) and lower case ( ) input.
Editing Input Text Editing and Deleting Text The method for editing text depends on whether you are using the 插入 (Insert) mode or 覆寫 (Overwrite) mode. For information about switching between 插 入 (Insert) and 覆寫 (Overwrite), see "Configuring Printer Settings" (page 54). Deleting a Single Character ■ Deleting the Character to the Left of the Current Cursor Position 1.
6. Changing the Font Your printer supports the fonts below. ■ Chinese Fonts 黑體 圓體 明體 楷體 黑體 圓體 明體 楷體 PP 體 SLB 體 BRD 體 CRS 體 ■ English Fonts Move the cursor to the last character of the text whose font you want to change and then press 執行 . x The pointer ( ) on the right side of the display indicates the currently selected font. x You can use 設定 (page 54) to specify the printer's initial power on default font.
4. Select the range of text where you want to apply the character style setting and then press 執行 . x If 全文 (All) is selected for the Free Design Label setting of the selected range of text, simply press 執行 . x If you selected something else for a free design label, use steps 5 and 6 to specify a range of text. 5. Move the cursor to the first character of the text you want to change and then press 執行 . 6. Move the cursor to the last character of the text you want to change and then press 執行 .
Removing a Text Effect 1. 2. Press 功能 and then 文字修飾 . Select 取消 (Cancel) and then press 執行 . x If you want to remove a single text effect from text where multiple text effects are applied, select the text effect to be removed and then press 執行 . 3. 4. Select 文字 (Character) and then press 執行 . 5. Move the cursor to the last character of the text whose text effect you want to remove and then press 執行 .
Creating, Editing, or Deleting a Phrase Memory Record Inserting the Current Date and/or Time into Text 1. 2. 1. Press 時間戳 . x This displays the current date and time (page 54), and then displays a screen for specifying the date and time input format. 2. Select the date/time input format and then press 執行 . x There are 11 input formats from which to choose. Press 功能 and then 模板編輯 . Select 作成 (Make) and then press 執行 . x If there is no text in the text input area, go to step 4.
Copying and Pasting Input Text Creating a User Character Copying Text You can create user characters that are not included with the printer's normal character and symbol set. x You can have up to four user characters stored in printer memory. x You cannot configure character style settings for a user character. x You can use either of the two methods below to create a user character. - From scratch: Use this method when you want to create a user character from scratch.
4. Cursor Create a user character. Scale ↓ Scale ↓ 5. 6. 7. Function Operation Move the cursor. Use arrow keys. Make the dot at the current cursor position black. Press 1 (black). x This will cause 1 黑 (1 Black) to be highlighted on the display. Make the dot at the current cursor position white. Press 2 (white). x This will cause 2 白 (2 White) to be highlighted on the display. Draw a black line. Press 1 (black) and then 3 (continuous), and then move the cursor. Draw a white line.
Editing an Existing User Character Deleting a User Character from Memory 1. 2. 3. 4. 1. 2. 3. 4. Press 功能 and then 造字 . Select 修正 (Edit) and then press 執行 . Select the user character you want to edit and then press 執行 . Perform the steps from step 4 of the procedure under "Creating a User Character from Scratch" on page 52. Press 功能 and then 造字 . Select 刪除 (Delete) and then press 執行 . Select the user character you want to delete and then press 執行 . Press 執行 .
Part 9 - Printer Settings Setting Items Setting Item This section explains how to configure text input mode, screen brightness, and other printer settings. Description Specifies the text input mode ( 插入 (Insert) or 覆寫 插入 / 覆寫 (Insert / Overwrite) (Overwrite)). 蜂鳴音 (Sound) Enables or disables the operation beeper. Configuring Printer Settings 背光 (Backlight) Enables or disables the screen backlight.
Part 10 - Reference 3. Close the battery cover. Power Requirements Your printer can be powered using the specified AC adaptor or by commercially available alkaline batteries. x Before using the printer, be sure to read the information under "Safety Precautions" (pages 4 through 7). Powering the Printer with Batteries Use eight commercially available AA-size alkaline batteries to power the printer. x Use a full set of eight new alkaline batteries.
User Maintenance Troubleshooting A dirty print head or rubber roller will make proper label printing impossible. Perform the procedure below to clean the print head and the rubber roller as required. This section explains reference information that comes in handy when you experience problems with printer operation. If, for any reason, you cannot find the solution to your problem here, contact your original retailer or authorized CASIO service center.
x The printer doesn't print. x Power turned off during printing. x Ink ribbon is coming out of the tape outlet along with the tape. x Batteries are dead or you are using the wrong type of batteries. x You are using the wrong type of AC adaptor. o Use the specified AC adaptor or replace the batteries with new ones (sold separately). x The print head is very hot. o Wait for some time and then try performing the operation again. x The printer won't connect with a computer.
Error Messages x 有無效的文字 (Illegal characters!) x You are attempting to input and print characters that are not allowed for the bar code you are printing. o Re-input using proper characters. (page 40) x 請確認與電腦的連接狀態 (Link error! Check all connections!) x 正在準備列印 (Getting ready to print (Appears when a print operation stops.)) x The printer has become overheated due to successive print operations. o Please wait without doing anything. Printing will resume when the printer returns to normal temperature.
x 色帶錯誤 色帶墨盒不適合 (Tape error! This is the wrong type of tape cartridge!) x 行數超限 無法列印 (Too many lines! Cannot print) x The tape compartment cover is not closed securely. x The label you are trying to print contains more than the allowable number of lines for the tape width you are using. o Close the cover securely. (page 17) o Reduce the number of lines or change to a wider tape.
Tape Width, Number of Lines, Size Factor List The maximum number of printable lines and maximum vertical size factor depend on the tape width and format being used.
Maximum print width: Approximately 16mm a) 4mm; Tape width: 6mm b) 7mm; Tape width: 9mm c) 10mm; Tape width: 12mm, normal printing d) 12mm; Tape width: 12mm, large label printing e) 16mm; Tape width: 18mm, 24mm Character formation: Bit map fonts Fonts : 4 Chinese ( 黑體 , 圓體 , 明體 , 楷體 ) : 8 English ( 黑體 , 圓體 , 明體 , 楷體 , PP 體 , SLB 體 , BRD 體 , CRS 體 ) Text orientation: Horizontal, vertical, mirror image printing Character styles: Normal, bold, outline, shadow, raised Number of printable lines: 1 to 2 for 6mm w
Appendix 符號 (Symbols) ● 注音 (Phonetics) ● 記述括弧 (Punctuation) ● 部首 (Radicals) ● 一般 (General) ● 學術 (Scientific) ● 發音 (Diacritics) ● 單位縮寫 (Units, Abbreviations) ● 希臘 (Greek) ● 數字 (Numbers) ● 俄文 (Russian) ● 2位數字 (Paired Numbers) APP-1
● 平假名 (Hiragana) 插圖 (Illustratons) ● 插圖1 (Illustration 1) ● 片假名 (Katakana) APP-2
● 插圖2 (Illustration 2) APP-3
圖文框 (Frames) APP-4
圖示標識 (Built-in logo) x 價格 (Price) 1 2 3 4 5 6 7 8 9 10 7 8 9 10 11 12 13 14 15 16 17 18 19 20 x 標識 (Sign) 1 2 3 4 5 6 APP-5
x 工作 (Work) 1 2 3 4 5 6 7 8 9 10 x 注意 (Attention) 1 8 9 10 11 12 13 14 15 16 17 18 19 20 2 3 4 5 6 APP-6 7
x PRICE 1 2 3 4 5 6 7 8 9 10 x SIGN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 APP-7
x WORK 1 2 3 4 5 6 7 8 9 10 x ATTENTION 1 8 9 10 11 12 13 14 15 16 17 18 19 20 2 3 4 5 6 APP-8 7
Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: Casio Europe GmbH Casio-Platz 1, 22848 Norderstedt, Germany www.casio-europe.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MO1507-A Printed in China © 2015 CASIO COMPUTER CO., LTD.
