GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE (not applicable to other areas). NOTICE This equipment has bean tested and found to comport with the omits for a Class B digital device, pursuant to Part 15 of the FGC Rufus.
A Caution AC Adapter + Do nat leave the power cord near stoves or other sources of intense ® heat. Clewing 50 oan mil power cord insulation and create the danger of tire and electrical shock. + When unplugging the power word from the wall socket, grasp the plug Never pull on the-cord itself. Doing so-can damage the power cord and create the danger of fire and electrical shock.
Contents Important Safety Precautions .. E4 Quick Reference E3 Part 1 Getting Acquainted Important Precautions General Guide Labs Printer Menus Pan 2 Getting Ready . PONE SUPPLY ..o AC Adapter . To connect the AC adapt Loading/Feplacing Batteries Loading/Peplacing the main batteries Turning Power On and Off . i Rawer On Recall Function Resetting the Memory To reset the memory . Auto Power Off Function Tape Cartridges . E0 To load a tape cartridge E-10 &1 Removing the Tape Cartridge .
Part 13 Data Communication... Part 14 Reference .. Cleaning the Printer Head and Roller . To clean the printer head and rafter . Initial Settings .. Initializing the Label Printer To initialize the abet print Format Indicator .. . “Tape-Length indicator . lust rations Cymbals, Dingbats, and Special Characters Frames . Rents .. ENLARGER Label Measurements Phrases . Bar Code Specifications B0 Troubleshooting E-41 Enron Messages E42 Specifications .
Label Printer Menus Label printer operation is designed to bs as simple as passionless, thanks o onscreen menus that you can use o select the settings you need. Each menu is described in detail in the sections that follow in this mania, but note the following general points when using them + The tem that is highlighted in a menu is the one : e p that is currently selected. 0T Cursorily selected firm ™ [cont ST + Use A and V 1o nave the highlighting up and down and change the defected tem.
To reset the memory 1. Make sure that label printer power is off. 2. While holding down the PRINT and ESC keys, pass (1 Taney ON to tum power on. scabies | 3. Press SET to initialize the label printer or ESC 10 abort the reset aspiration without initializing anything, = Gee “Initial Se tings” on gaps E-37 for information o the initial default singsongs of the Isabel printer hollowing the reset operation, * You have to reset the Lane! Printer if yous want o sangs the on-screen message language.
To produce a demo print 1. Press ON o tum power on. 2. Press PRINT and then SET. The following are samples of the demo print that the above procedure produces, Note that the contents of the dame print depends on the width of the tape goaded in the abet printer.
To input alpha-numeric characters 1. Tum power on. 2. input the first fine of characters. * To input the upper-case letters, you can use either SHIFT or CAPS. With SHIFT you must shift the keyboard for each character. With CAPS the keyboard keeps its setting until you press CAPS again * Crass SPACE to input spaces. « if you input & wrong character, press BS ta dolomite it and input again. See detestation sidesplitting. 3.
To create a user character from the user character you created 1. Press FUN and then ILLUS {USER CHRIS. 2. Use A and V ta move the highlighting to “EDIT” and then press SET. 3. Use < and > o select the user character you want to edit, and then press SET. 4. Use the user character drawing techniques described to edit the character you want, and thee press SET, 5. Continue.from stop.7 under.To crests a user character using.an. existing character”. To recall a user character 1.
Part 5 Character Attributes and Text Effects ‘The operations in this part of the manta explain how to sangs fonts and character styles. Those characteristics are called “character attributes * 1t also tells vou how to assign such text elects as underlining, shading, and box printing fo tad. Important! « Character attributes you specify affect printed text only. The characters on the display do riot change. « Remember that character attributes are assigned to specific characters.
CHARACTER “This tangs specifies application of 2 text affect for A B C specific character. i 20573 [a]n e TEXT This range is used 1o pacify let across various. tines, etc. ] » Arrangement specification must begin.and end. % with in the same block. 2 < To assign text effects 1. While there i5 text on the display, press EFFECT. ax 2. Use A and W to highlight the effect you want and then press SET. « What you should do next depends on the rang you want to use.
« The range {From To settings) far & character size specification cannot extend from one bock to another. Notes + Proportional spacing cannot be used with the small typeface, « Available font is ably one « Style and text effect settings may not print correctly when used with the sma typeface. + Outstanding. user. chatters. may. not print scarily when. used.with. slam typeface. To change character size using direct specification 1. White tiara is text on the display, press SIZE. BRIE oo ., 2.
Part 7 FORM Menu Functions “This part of the manual describes how 1o use tha FORM men 1o layout your text exactly the way you wart it on the fable. With the FORM menu, yau can control character pitch, ext blacks, text alignment, and a wide range of other features. Fundamentals of Label Layout Before we actually begin our discussion about how 1o layout a taps, we should first define a faw tors. Note the following. Blocks Block is text that is enclosed between two block marks (l).
CHARACTER PITCH This is the relative spacing between characters. You can specter charter pinch as NONE, NARROW, MEDIUM or WIDE. The following shows examples of each character pith settling. NONE NARROW ABC Company ABC Company MEDIUM WIDE ABC Company ABC Company BLOCK LENGTH Sal act FIX" if you want so specify a fixed book length in the range 99.9.0m. Pacify "AUTO” for this caption if you want the fable printer to automatically adjust the length of the block.
« An easy way to remove e backing from a tape and expose the adhesive surface is to bend the tape sear one of its ends. This should cause the gape and its backing to separate, allowing you 10 pull them apart. To adjust the print density . Tum power on. zv Cross FUN and then FORM (SET UP) to display the SET UP menu. 3.
4. Use A and V to nova the highlighting to “VHS" and then pass SET. §. Use < and > 1o move the highlighting o the number [ xis = sy of the layout you want to use and then |TI7LE press SET « Note that some blocks already contain characters. You can use the characters as they are or replace them with new ones, 6. Input the text you want lo include in each element, and then press SET 1o advances 1o the next elopement.
9. Press SET to end the operation ITF, CODE, CODA BAR “The following applies to ITF, CODES and CODA BAR bar codes. To print a bar code . While the PRESETS menu is on the display, use A and V' 1o move the highlighting to “BAR CODE” and then press SET, :~Use A and Vto move the highlighting to "NEW" and thee prods SET. . Use A and V to move the highlighting to the type e of tar ode you want o print s then preys SET. 4.
AR e i The startup printing feature fetch you create your own stamps using a selection of various formats. Then you can print on special stamp tape and attach the finished taps to an optionally available stamp holder, Wuhan using the ST-15 stamp holder, select NL (10 x 55mm) as the stamp hotter type in step 3 of the procedure described blow. important Note that an optional special stamp tape cartridge and stamp tape border is required In order o Create a drinker stamp.
NEW 1. Use A and V 1o move fha highlighting to “NEW". 2. Pres SET to delete any text that was previously on the input screen and replace it with the recalled text. COMBINE 1. Use A and \V to nave fie highlighting to “COMBINE” and then pass SET. 2. Use < and > o nave the cursor to the location whets you warn the recalled text inserted and then press SET. To recall memory text using character search 1. Press MEMORY. 2. Use A and V io move the highlighting to “RECALL” and then press SET. 3.
Phrases Bar Code Specifications BARGAIN DO NOT BEND Automatically Assigned R Gal Downtrend Bar Code | Check | Prut | Input Digits Digits. It Characters Type | Digit "1 |Digits *3 4 (Ch oak s DUPLICATE.
Inkblot s Sang Ted frond the tpe outset along with the tape, Possible Cause Action » Using Labels Patel will not adhere 10 a surface. Ink rib lion cassette loaded while the ink ribbon is slack. Ra move the ink ribbon cassette and check to make sure the ink ribbon is not broken. Next, take up any slack in the ink ribbon and then reload the tape cartridge. Important < Be fora goading an Tk ribbon telecasts o the label printer, always mask sure you take up any slack in the ink ribbon first.
Specifications Model: KL-8100 Input Keyboard Layout: Typewrites (QWERTY} Character Types Alpha {English and other languages): 52 (4~Z, a-2), Etc) Numbers: 10 Symbals/Greek and Russian Characters: 306 illustrations: 50 Display Type: Liquid crystal display Columns: 12 Lines: 2 Printing Type: Thermal transfer Sped: Approximately microsecond Width: 4mm (6mm tape); Smm {Sm rm tape); 10mm (12mm tape): 16mm (181 24mm tape} Character Matrix: 46 x 48 dots Character forts: New Sans-serif, New Sans-serf italic, New Ro
