USER’S GUIDE English ES Safety Precautions Before trying to use the piano, be sure to read the separate “Safety Precautions”. GUÍA DEL USUARIO Guarde toda la información para futuras consultas. Precauciones de seguridad Antes de intentar usar el piano, asegúrese de leer las “Precauciones de seguridad” separadas. CDP200RES1C Español Please keep all information for future reference.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Important! • Before using the AD-12 Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged. • The product is not intended for children under 3 years. • Use only CASIO AD-12 adaptor. • The AC adaptor is not a toy. • Be sure to disconnect the AC adaptor before cleaning the product. This mark applies in EU countries only.
Contents General Guide ............................. E-4 Using the 10-key Pad (cl) .................................E-6 FUNCTION Button (7) Functions .....................E-6 Getting Ready to Play ................ E-7 Preparing the Music Stand .................................E-7 Connecting a Pedal Unit.....................................E-7 Power Supply .....................................................E-7 Playing the Digital Piano............ E-8 Turning on Power and Playing ........................
Contents English Other Useful Digital Piano Functions .................................. E-51 Changing the Scale of the Keyboard................E-51 Using Music Preset ..........................................E-53 Using the Arpeggiator.......................................E-54 Deleting User Song Data..................................E-55 Deleting All Data in Digital Piano Memory........E-55 Using a Memory Card............... E-56 SD Memory Card and Card Slot Precautions...
General Guide • In this manual, buttons and other controllers are identified using the numbers shown below.
General Guide 1 POWER button ☞E-8 2 MAIN VOLUME knob ☞E-8 3 MIC VOLUME knob ☞E-16 4 RHYTHM EDITOR button ☞E-41, 42 5 SCALE EDITOR button ☞E-51, 52, 53 6 SAMPLING button ☞E-17, 18, 19, 21, 57 7 FUNCTION button ☞E-6 8 RECORDER button ☞E-46, 47, 48, 49 9 METRONOME, BEAT button ☞E-10 bk INTRO, REPEAT button ☞E-26, 31, 38, 41 bl NORMAL/FILL-IN, REW button bt TONE, MUSIC PRESET button ck CARD, SAVE/LOAD button ☞E-57, 58, 59, 60, 61 cl Number buttons, [–]/[+] buttons ☞E-6 cm BANK, LISTEN, CHORD/TR1 button ☞E-18,
General Guide Using the 10-key Pad (cl) Use the number buttons and the [–] and [+] buttons to change the settings of the parameters that appear in the upper left area of the display. Function Number Buttons Use the number buttons to enter numbers and values. • Enter the same number of digits as the currently displayed value. Example: To enter tone number 001, input 0 3 0 3 1. • Negative values cannot be input using the number buttons. Use [–] (decrease) and [+] (increase) instead.
English Getting Ready to Play Preparing the Music Stand Music stand Connecting a Pedal Unit Connect an optional pedal unit. SUSTAIN/ASSIGNABLE JACK Power Supply Use only the AC adaptor that is specified for use with this Digital Piano. Specified AC Adaptor: AD-12 Using the AC Adaptor DC 12V terminal AD-12 Household power outlet • Be sure to turn off Digital Piano power before connecting or disconnecting the AC adaptor.
Playing the Digital Piano 1 2 7 9 cl bq Turning on Power and Playing 1. Press 1. This turns on power. 2. Try playing something on the keyboard. Use 2 to adjust volume. Using Headphones Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night without disturbing others. • Be sure to turn down the volume level before connecting headphones.
Playing the Digital Piano Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano. Changing Touch Response Sensitivity Use the procedure below to control how much the volume of played notes change in accordance with playing speed. Select the setting that best matches your playing style. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “Touch” (page E-6).
Playing the Digital Piano Using the Metronome The metronome lets you play and practice along with a steady beat to help keep you on tempo. Changing the Metronome Tempo Use the following procedure to change the tempo of the metronome. 1. Press bq. Start/Stop 1. Press 9. This starts the metronome. This pattern changes with each beat. 2. Press 9 again to stop the metronome. Use w (slower) and q (faster) to change the tempo setting. Holding down either button changes the setting at high speed.
7 bs bt English Controlling the Keyboard Sounds cl csct cs ct Select from a variety of musical instrument sounds 3. Try playing something on the keyboard. The tone of the instrument you selected will sound. Your Digital Piano lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. To select an instrument for playing 1. Press bt.
Controlling the Keyboard Sounds Layering Two Tones You can use the following procedure to layer two different tones (such as piano and strings) so they sound simultaneously when you press a keyboard key. 1. Select the first tone you want to use. Press bt and then use cl (10-key) to select the tone you want. Example: 026 ELEC.PIANO 1 E.
Controlling the Keyboard Sounds plays only the tone you selected in step 1). • Each press of cs toggles between split (two tones) and unsplit (one tone). Using Reverb Reverb adds reverberation to notes. You can change the duration of the reverb. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “Reverb” (page E-6). Reve r b Disappears • If you turn on both layer and split, layering will be applied to the right side range of the keyboard only. To change the split point 1.
Controlling the Keyboard Sounds Using a Pedal A pedal can be used to change notes in various ways while playing. Selecting the Pedal Effect 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “OTHER” (page E-6). Changing the Pitch (Transpose, Tuning, Octave Shift) Changing the Pitch in Semitone Steps (Transpose) The transpose feature lets you change the pitch, in semitone steps. A simple operation lets you instantly change the pitch to match that of a singer.
Octave Shift Octave Shift lets you raise or lower the pitch of the keyboard notes in octave units. • The octave shift setting range is –2 to +2 octaves. • When using Split (page E-12), you can individually set the left and right keyboard ranges to the pitches you want. 1. Keep pressing ct until the screen shown below Using the Pitch Bend Wheel to Shift the Pitch of Notes You can use the pitch bend wheel to slide the pitch of notes smoothly upwards and downwards.
Sampling Sounds and Playing Them on the Digital Piano 3 6 7 bs bt cl cmcn cm cnco cocp cpcq cqcr cr You can sample a sound from a microphone, a portable audio player, or other device, and then play the sound on the Digital Piano’s keyboard. For example, you could sample the bark of your dog and then use the sound in a melody. You also can sample and use passages from a CD. The sampling feature is a great way to create new sounds that are highly creative.
Sampling Sounds and Playing Them on the Digital Piano Use the procedures in this section to sample a sound and play it as the melody part on the Digital Piano. • Up to five sampled sounds can be stored in Digital Piano memory as tone numbers 671 through 675. Simply select the tone number where the sound you want is located to assign the sound to the keyboard. 3. Output the sound from the external device. In the case of a microphone, output the sound in the direction of the microphone.
Sampling Sounds and Playing Them on the Digital Piano ■ How sampled sounds are played Pressing Middle C (C4) will play back the original sound. The keys to the left and right of C4 play the sound at different pitches. Changing the Volume of Sampled Sound Looped Playback You can use the following procedure to change the volume level of the looped playback of each sampled sound, if you want. 1. Press the button of the sampled sound whose volume you want to change (cm to cq).
Applying Effects to a Sampled Sound You can apply various effects to sampled sounds. 1. Press bt and then use cl (10-key) to enter the tone number (671 to 675) to which you want to apply effects. 2. Press bt to cycle thorough the available effects, described below. Effect Type (Display) Incorporating a Sampled Sound into a Drum Set (Drum Sampling) You can use the procedure to change the drum sounds that are assigned to each keyboard key.
Sampling Sounds and Playing Them on the Digital Piano 4. Press the keyboard key to which you want to assign the drum sound you are about to sample. This enters sampling standby. The allowable sampling time (in seconds) will appear on the display momentarily and then the display will change to the following. Wa i t i n g Flashes 5. Output the sound from the external device. In the case of a microphone, output the sound in the direction of the microphone. Sampling will start automatically.
Sampling Sounds and Playing Them on the Digital Piano You can use the procedures in this section to copy the drum sound assigned to one keyboard key to another key, to change the pitch of a sound, and to delete a sampled sound. 1. Press bt and then use cl (10-key) to enter the tone number (676, 677, or 678) for the drum set you want. 2. Press 6. 3. Press 7.
Sampling Sounds and Playing Them on the Digital Piano Other Sampling Functions Changing to a Manual Sampling Start Normally when the Digital Piano is in sampling standby, it will start sampling automatically whenever it detects sound input. You can use the following procedure to enable manual sampling start, which will cause sampling to wait until you press a button to start it. You can use this to insert silence before the sampled sound. 1.
Sampling Sounds and Playing Them on the Digital Piano You can use the following procedure to specify a sampled tone number and delete its data. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “DELETE” (page E-6). Flashes Protecting Against Accidental Deletion of Sampled Sounds You can use the following procedure to protect each sampled sound against accidental deletion. 1. Press bt and then use cl (10-key) to enter the tone number of the sampled tone you want to protect. 2.
Playing Built-in Songs 7 bk bl bm bn bo bp • In addition to simple listening enjoyment, the built-in songs can be used with the lesson system (page E-28) for practice. • You can increase the number of tunes using your SD memory cards (page E-59) or computer (page E-62). Playing the Demo Songs Use the following procedure to play back built-in songs. 1. Press bo and bp at the same time. This will start playback of the demo songs. • See page E-72 for information about song numbers and the song sequence.
Playing Built-in Songs Use the procedure below to play back one of the built-in songs. You can play along on the keyboard with song playback. Pause, Skip Forward, Skip Back Use the operations in this section to perform pause, skip forward, and skip back operations. ■ Pause 1. Press bn. Start/Stop This pauses song playback. 1. Press br. 2. Press bn again to resume playback from the Song number Tune name point where you paused it. Tw i n k l e 2.
Playing Built-in Songs Repeating Playback of Specific Measures You can use the procedure in this section to repeat particular measures for practice playing along until you master it. You can specify the start measure and the end measure of the section you want to play and practice. Start End These measures are repeated. 1. Press bk to temporarily turn off song repeat (“REPEAT” disappears from the display). 2. When song playback reaches the measure you want to specify as the start measure, press bk.
Playing Built-in Songs English Turning Off the Part of One Hand for Practice (Part Select) You can turn off the right hand part or the left hand part of a song during playback and practice playing along with the remaining part. 1. Press bp to select the part you want to turn off. Each press of bp cycles through the settings shown below. Right hand part off Left hand part off Both hand parts off Both hand parts on 2. Press bo.
Using Built-in Songs to Master Keyboard Play 7 bk bl bm bo bp To master a song, it is best to break it up into shorter parts (phrases), master the phrases, and then put everything together. Your Digital Piano comes with a Step Up Lesson feature that helps you to do just that. Phrases The built-in songs are pre-divided into phrases to help you master keyboard play. Song start Phrase 1 Song end Phrase 2 Phrase 3 . . . .
Using Built-in Songs to Master Keyboard Play The following are the messages that appear on the display during Step Lessons. Message Description Appears when you select a phrase, when a lesson starts, etc. • Note that certain phrases will cause “Wait” to appear instead of “Phrase”. Appears when the lesson starts with an intro or fill-in phrase that is not included in the phrases to be practiced.
Using Built-in Songs to Master Keyboard Play 2. Play notes on the keyboard in accordance with Lessons 1, 2, and 3 Now it is time to start the lessons. First, select the song and part you want to practice. Lesson 1: Listen to the song. the instructions provided on the display and by voice fingering guide. During this lesson, the display shows the key you need to press next. Voice fingering guide uses a simulate voice to announce which finger you should use.
Using Built-in Songs to Master Keyboard Play Though song playback stands by waiting for you to press the correct keys as in Lesson 2, the Digital Piano does not provide any guidance about what note you need to play next. Remember everything you have learned up to Lesson 2 as you play. 1. Press co. Playing a Particular Song All the Way Through After you successfully complete all of the phrases in Lessons 1, 2, and 3, it is time to try playing the entire song from beginning to end. 1.
Using Built-in Songs to Master Keyboard Play Turning Off Note Guide Changing the Phrase Length Use the following procedure to turn off note guide, which sounds the note to be played next in Lesson 2 and Lesson 3. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “LESSON” (page E-6). 2. Press cl (10-key) [7] (ENTER) key. 3. Use the cl (10-key) [4] (u) and [6] (i) keys to display “NoteGuid”.
Using Built-in Songs to Master Keyboard Play ■ Auto Step Up Lesson Procedure With Auto Step Up Lesson, the Digital Piano advances through each lesson automatically. Phrase 1 Lesson 1 1. Select the song and part you want to practice 4 Lesson 2 English Using Auto Step Up Lesson 4 Lesson 3 (page E-25). 2. Press cq. Listen to the first phrase in Lesson 1. • In Lesson 1, the sample phrase is played only once before advancing to Lesson 2.
Music Challenge Keyboard Game 1 br bs bo Music Challenge is a game that measures your reaction speed as you press keys in response to on-screen keyboard indicators and fingering guide indications. 1. Press br. 2. Press cr. This causes a key on the on-screen keyboard to start to flash, and starts the Music Challenge song. Number of remaining notes M . CHA L . ! bt cr 4. The game ends when you advance successfully through 20 notes. • Your playing time appears on the display.
7 bk bl bm bn bo bp bs cl bq With Auto Accompaniment, simply select an accompaniment pattern. Each time you play a chord with your left hand the appropriate accompaniment will play automatically. It’s like having a personal backup group along with you wherever you go. • Auto Accompaniments are made up of the following three parts. (1) Rhythm (2) Bass (3) Harmony You can have only the rhythm part play, or you can have all three parts play at the same time.
Using Auto Accompaniment 5. Pressing bp again returns to rhythm only Playing All Parts accompaniment. Auto Accompaniment with Chords Playing a chord with your left hand automatically adds bass and harmony accompaniment parts to the currently selected rhythm. It is just like having your own personal back up group on call. 1. Start play of the Auto Accompaniment rhythm part. 2. Press bp. This enables chord input on the accompaniment keyboard.
Using Auto Accompaniment With these three input modes, you finger 3-note or 4-note chords on the accompaniment keyboard. Note that with some chords, even if you do not finger the third or fifth note, they will be played anyway. Accompaniment keyboard ● FINGERED 1 Play the component notes of the chord on the keyboard. ● FINGERED 2 Unlike FINGERED 1, 6th input is not b possible. m7 or m7 5 is input.
Using Auto Accompaniment Using Auto Accompaniment Effectively Auto Accompaniment Pattern Variations Use the following procedures to play intro and ending patterns, to play fill-in patterns, and to play variations of basic Auto Accompaniment patterns. ■ Auto Accompaniment Variation Each Auto Accompaniment pattern has a basic “normal pattern” as well as a “variation pattern”. 1. Press bm. ■ Auto Accompaniment Fill-in Use the procedure below to play a fill-in pattern during a performance.
Using Auto Accompaniment Use the following procedure to configure the Digital Piano to start Auto Accompaniment play as soon as you press a keyboard key. 1. Press bn. This enters accompaniment start standby. Flashes Adjusting the Accompaniment Volume Use the following procedure to adjust the balance between what you are playing on the keyboard and the volume of the Auto Accompaniment. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “AcompVol” (page E-6). A c ompVo l 2.
Using Auto Accompaniment Type number Using Auto Harmonize Auto Harmonize automatically adds harmony to notes you play with your right hand, which adds rich depth to the melody of your performances. You can select from among 12 types of Auto Harmonize to suit the type of music you are playing. Type Name Description 1 Duet 1 Adds close (separated by 2 to 4 degrees) 1-note harmony below the melody note. 2 Duet 2 Adds open (separated by more than 4 to 6 degrees) 1-note harmony below the melody note.
4 7 bs English Editing Auto Accompaniment Patterns cl bk bl bm bn bo bp ■ Editable Contents You can use the procedure in this section to edit the Digital Piano’s built-in Auto Accompaniment rhythm patterns and create your own “user rhythms”. • You can store up to 10 user rhythms in Digital Piano memory, using rhythm numbers 201 through 210.
Editing Auto Accompaniment Patterns 3. Press a button from bk to bn to select the 7. To edit the other contents, press 7 to display Accompaniment Pattern you want to edit. the screen for the setting you want. The name of the pattern will appear on the display. • Each press of 7 will cycle through the settings shown below, from 1 through 6. • Use the cl (10-key) [–] and [+] keys to change the currently selected setting. • You can play the current settings of the editable part by pressing bo.
Editing Auto Accompaniment Patterns saving. This displays the delete confirmation message. Press the cl (10-key) [+] key to exit the editing procedure. 11-2.Press the cl (10-key) [+] key to save the data. F u n k To delete saved data The following procedure cannot be performed while an Auto Accompaniment editing (rhythm edit) operation is in progress. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “DELETE” (page E-6).
Saving Keyboard Setups to Registration Memory 7 bk bl bm bn bo bp bq Registration memory lets you store Digital Piano setups (tone, rhythm, etc.) for instant recall whenever you need them. Registration memory simplifies performance of complex pieces that require successive tone and rhythm changes. You can have up to 32 setups in Registration memory at one time. cm and cn to cq are used for recording.
To save a setup to registration memory 1. Press bs. To recall a setup from registration memory 1. Press cm to select the bank that contains the Lights setup you want to recall. Bank 6 Bank number 2. Configure the tone, rhythm, and other settings you can to include in the setup. 3. Press cm to select the bank you want. Each press of cm cycles through the bank numbers. 2. Use buttons cn to cq to select the area whose setup you want to recall.
Recording Your Keyboard Play 8 br bs bo bp The recorder feature lets you record your keyboard play. bt cl cm cn cnco cocp cpcq cq cr 4. Configure the tone, rhythm, and other settings you want to use. Recording and Playing Back Keyboard Play Use the following procedure to record everything you play on the keyboard. 1. Press bs. 5. Start playing. Recording starts as soon as you play something on the keyboard. • You can use Auto Accompaniment while playing.
8. Press 8 twice to exit the recorder mode. Using Tracks to Record and Mix Parts You can divide a song according to various types of parts (instrument, left and right hand, etc.), and record each part to a specific track. You can mix up to six tracks (the original track plus five additional tracks) into a final song. Disappears • The flashing on the screen shown in step 3 becomes faster when remaining recorder memory capacity becomes less than 100 notes.
Recording Your Keyboard Play 3. Press a button from cn to cr to select the track 8. Press 8 twice to exit the recorder mode. number of the next track to which you want to record. This will enter record standby for the track you selected. Example: Track 2 Flashes Disappears ■ To delete a recorded track Flashes • If you want to use a different tone than the one you used in Track 1, press bt and then use cl (10-key) to input the tone number. 4. Press bo.
Recording Your Keyboard Play 5. Press bp to cycle through the parts in the sequence shown below. This section explains how to play along and record along with one of the keyboard’s built-in songs. English Recording while Playing Along with a Built-in Song Right-hand Recording ● The following operations and settings also are recorded along with your keyboard play.
Recording Your Keyboard Play Saving Recorded Data on an External Device You can save data you record with the piano onto an SD memory card or on your computer’s hard disk. In the case of an SD memory card, you can save recorded song data as a standard MIDI file (SMF 0 format). ■ To save data to an SD memory card See page E-58. ■ To save data on your computer’s hard disk See page E-65.
5 7 bs bt cl cn co cocp cp cq cqcr cr Changing the Scale of the Keyboard You can use the procedure in this section to change the scale (tuning system) of the keyboard from the standard equal temperament to another scale that is more suitable for playing Indian music, Arabic music, ancient classics, etc. You can select from among 16 preset scales, or you can adjust specific notes to created the scale you want. The Scale Editor provides you the following four options for changing the scale.
Other Useful Digital Piano Functions ■ Quarter Tone ■ Preset 1. Press the key whose note you want to change, and then press the cl (10-key) [–] key to reduce 1. Use the cl (10-key) [–] and [+] keys to select the the tuning value by –50 cents. You can return to the original tuning by pressing [+]. 2. After you are finished, press 5 to assign the scale to the keyboard. Tuning value preset scale you want.
Other Useful Digital Piano Functions Saving User Scales ■ To save a user scale 1. Press bs. 2. Press 5. 3. While holding down cr, press a button from cn to cq to select an area. Selecting a Music Preset instantly changes the Digital Piano to a preset setup (tone, rhythm, tempo, etc.) for play of songs of various genres/categories. The press of a button sets up the Digital Piano so those songs sound exactly the way you thought they should.
Other Useful Digital Piano Functions Type number Using the Arpeggiator The Arpeggiator makes it possible to play an arpeggio pattern automatically. There are 90 different arpeggio patterns from which to choose in order to match the music you are playing. • The Arpeggiator is controlled using the same button dk as Auto Harmonize (page E-40). Because of this, these two functions cannot be used at the same time.
Deleting User Song Data You can use the following procedure to delete user song data stored as song numbers 153 through 162. 1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “DELETE” (page E-6). Flashes DELETE Used memory (Unit: Kbytes) Deleting All Data in Digital Piano Memory Use the following procedure when you want to delete sampled sounds, user songs and all other data, except for recorded songs, currently in Digital Piano memory.
Using a Memory Card 5 7 bs ck cl bo Your Digital Piano’s SD memory card slot makes it possible for you to store record memory and other data on a commercially available SD memory card. SD Memory Card and Card Slot Precautions ● Supported SD Memory Cards Your Digital Piano supports the use of memory cards up to 2 GB. Use of any SD memory card with greater capacity is not supported. See the instructions that come with the SD memory card for information about its capacity.
Using a Memory Card • Note that the SD memory card must be oriented correctly when you insert it into the SD memory card slot. Trying to force the memory card into the slot can damage the card and the slot. 1. With the top of the SD memory card facing upwards (so you can see it), carefully insert the card into the piano’s SD memory card slot (dq) until stops with a click. Formatting an SD Memory Card • Before using an SD Memory card, first be sure to format it on the piano.
Using a Memory Card Saving Digital Piano Data to an SD Memory Card Use the following procedure to save Digital Piano data to an SD memory card. 4. Use the cl (10-key) [4] (u) and [6] (i) keys to display one of the settings shown below. • You also could use [–] and [+]. To save this data Display this screen Sampled sound “SAv” “SmplTone” User rhythm “SAv” “UserRhy.” Recorded song “SAv” “Rec.
• You can input the following characters in a file name. Loading Data from an SD Memory Card into Digital Piano Memory 9 J T ' Use the following procedure to load data from an SD memory card into Digital Piano memory. • The Digital Piano displays the “~” character as “3”. 1.
Using a Memory Card 5. Press the cl (10-key) [7] (ENTER) key. Flashes ******** • Pressing [9] (EXIT) will return to the screen that was displayed before you pressed [7] (ENTER). 6. Use the cl (10-key) [–] and [+] keys to select the data (file) you want to load. 7. Press the cl (10-key) [7] (ENTER) key. This will load the data into Digital Piano memory. Comp l e t e • If there is already data stored in the user area where you are trying to load data, an overwrite confirmation message will appear.
5. Press the cl (10-key) [7] (ENTER) key. Flashes ******** • Pressing [9] (EXIT) will return to the screen that was displayed before you pressed [7] (ENTER). 6. Use the cl (10-key) [–] and [+] keys to select the number of the data (file) you want to delete. 7. Press the cl (10-key) [7] (ENTER) key. This will display the delete confirmation screen. Su r e? 8. Press the cl (10-key) [+] (YES) key. • To cancel the delete operation, press [–] (NO) or [9] (EXIT) in place of [+] (YES).
Connecting External Devices 7 cl bp Connecting a Computer You can connect the Digital Piano to a computer and exchange MIDI data between them. You can send play data from the Digital Piano to music software running on your computer, or you can send MIDI data from your computer to the Digital Piano for playback. Minimum Computer System Requirements The following shows the minimum computer system requirements for sending and receiving MIDI data.
5. Configure the music software settings to select one of the following as the MIDI device. MIDI Settings CASIO USB-MIDI : (For Windows Vista, Mac OS X) USB Audio Device : (For Windows XP) Keyboard Channel • For information about how to select the MIDI device, see the user documentation that comes with the music software you are using. • Be sure to turn on the piano first before starting up your computer’s music software.
Connecting External Devices ■ Turning Off the Navigate Channel Sound and Playing the Part on the Keyboard You can turn off the sound on one or both of the navigate channels and play the cancelled part on the keyboard yourself. 1. Press bp to select the channel setting you want to turn off. Each press of bp cycles through settings (1) thorough (4) described below. • If you turn off one channel, you can play the cancelled part on the keyboard using the same tone as the channel you turned off.
Storing and Loading Piano Memory Data You can transfer sampled sounds, recorded songs, and other data in piano memory to a computer for storage. You also can load standard MIDI file (SMF) data, and Auto Accompaniment data you download from the CASIO website to the piano, which greatly expands the Song Bank songs and Auto Accompaniment patterns available to you. A special Data Manager application is required in order to transfer data to and from the piano.
Connecting External Devices Connecting to Audio Equipment This Digital Piano can be connected to commercially available stereo, amplifier, or recording equipment, to a portable audio player or other equipment. Outputting Keyboard Notes to Audio Equipment Connection requires commercially available connecting cords, supplied by you. The connecting cords should have a stereo standard plug on one end and a plug that matches the configuration of the external device on the other end.
English Reference Troubleshooting Symptom Action Included Accessories I can’t find something that should be here. Carefully check inside all of the packing materials. Power Requirements Power will not turned on. Correctly attach the AC adaptor (page E-7). Display On-screen keyboard keys or notes remain on the display. A Step Up Lesson is in progress and the Digital Piano is waiting for you to play the next note in the song. To stop this from happening, cancel the lesson (page E-30).
Reference Symptom Action This is due to system limitations. It does not indicate malfunction. In certain keyboard ranges, the volume and tone quality sound are slightly different from those in other keyboard ranges. With some tones, octaves do not change at the far ends of the keyboard. This is due to system limitations. It does not indicate malfunction. The pitch of the notes does not match other accompanying instruments or sounds strange when played long with other instruments.
Reference Model Keyboard Touch Response Maximum Polyphony English Specifications CDP-200R 88-key piano keyboard 3 types, Off 48 notes (24 for certain tones) Tones Built-in Tones 670 Sampling Tones Up to 8 (Melody Sampling: 5, Drum Sampling: 3)* Up to 10 seconds Functions Layer, Split Reverb 1 to 10, Off Chorus 1 to 5, Off Metronome Beats per Measure 0, 2 to 6 Tempo Range 30 to 255 Song Bank Built-in Songs 152 User Songs Up to 10* Step Up Lesson Lessons 4 (Listen, Watch, Remember, Auto
Reference Inputs/Outputs USB port TYPE B Sustain/Assignable jack Standard jack (sustain, sostenuto, soft, rhythm start/stop) Phones/Output jack Stereo standard jack Output Impedance: 20Ω, Output Voltage: 1.
Reference Display Message Cause Action Err CardFull There is not enough room available on the SD memory card. • Delete some of the files on the SD memory card to make room for new data (page E-60). • Use a different SD memory card. Err Card R/W The SD memory card is damaged. Use a different SD memory card. Err Convert There is not enough unused memory available to save recorded song data to an SD memory card as an SMF 0 format file.
Reference Song List SONG BANK 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 E-72 WORLD TWINKLE TWINKLE LITTLE STAR LIGHTLY ROW LONG LONG AGO ON TOP OF OLD SMOKEY SAKURA SAKURA WHEN THE SAINTS GO MARCHING IN AMAZING GRACE AULD LANG SYNE COME BIRDS DID YOU EVER SEE A LASSIE? MICHAEL ROW THE BOAT ASHORE DANNY BOY MY BONNIE HOME SWEET HO
B Root m6 6 69 dim7 mM7 madd9 add9 7sus4 7b5 m7b5 M7 m7 7 sus2 sus4 aug dim m M Chord Type C Chord Chart C#/(Db) D (D#)/Eb E F F#/(Gb) G (G#)/Ab A (A#)/Bb English B Reference E-73
B Key’s Ch’s After Touch Control Change Pitch Bender Note ON Note OFF Velocity True voice 0, 32 1 6, 38 7 10 11 64 O X O *2 O O X O *4 O X X O 9nH v = 1 - 127 X 9nH v = 0 0 - 127 Mode 3 X Default Messages Altered Mode Note Number 1 1 - 16 Default Changed Transmitted O (MSB only) O O *3 O O O O O X O O 9nH v = 1 - 127 X 9nH v = 0, 8nH V =** 0 - 127 0 - 127 *1 Mode 3 X 1 - 16 1 - 16 Recognized MIDI Implementation Chart Basic Channel Function Model: CDP-200R Bank select Modulat
B :True # : Clock : Commands : Local ON/OFF : All notes OFF : Active Sense : Reset System Real Time Aux Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Remarks Messages : Song Pos : Song Sel : Tune System Common System Exclusive Program Change 66 67 91 93 100, 101 120 121 Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO O O O O O *3 O O Sostenuto Soft pedal Reverb send Chorus send RPN LSB, MSB All sound off Reset all controller O : Yes X : No Depende del tono.
This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.
