Specifications

— 12 —
4. RESET OPERATIONS
Two kinds of reset operations can be performed:
All-reset operation
deletes all data in memory.
Secret-reset operation
deletes only your password and the data in the Secret Memory Area.
Important!
Do not use a very sharp pencil to press the RESET button. Doing so can damage the JD-6000/7000.
Be sure to perform the all-reset operation before you use the JD-6000/7000 for the first time.
After check to make sure that the main batteries and back-up battery are correctly installed, perform the
RESET operation.
To Perform All-Reset:
1. Switch the power off.
2. Remove the screw that holds the battery compartment cover in place, then remove the battery
compartment cover.
3. Press the RESET button on the back of the JD-
6000/7000 with a thin, pointed object.
4. Press to select "Reset," then press EXE.
5. Press to select "Yes, " then press EXE.
6. The main menu will appear and all data will be
deleted.
7. Replace the battery compartment cover and
the screw that secures it in place.
If you want to cancel the reset operation
immediately after you have pressed the RESET
button, select "Exit," then press EXE.
RESET button
RESET