User manual

Using a microSD Card

IT-G600/IT-G650 supports micro SD cards.

The microSD card slot is located in the battery pack compartment, so you must remove the

battery pack before installing or removing a microSD card.

Installation

1. Turn the terminal off (shutdown).

2. Remove the battery pack.

(Steps 5 and 6 in the battery pack replacement

procedure on page 21)

3. Push the microSD card into the card slot until

it is fully inserted, as shown in the ﬁ gure.

4. Install the battery pack.

(Steps 2 and 3 in the battery pack replacement

procedure on page 19)

Precautions for Use

• The front and back of the card are different, so the card must be oriented correctly

when inserted into the slot. Inserting the card incorrectly could damage the card

and/or the slot. Take care when inserting cards.

• When turning off the smart handheld terminal, be sure to select “Shutdown” and not

“Hot Swap”.

Removal