User manual

22
Precautions for Use
• In the Hot Swap mode, even if the battery pack is removed, your work state is saved
up to 4 minutes with the memory (RAM) backup function.
The memory (RAM) backup time may decrease depending on the backup battery
charging level.
• In the Hot Swap mode, the terminal will not respond even if you press the Power key.
To exit Hot Swap mode, open the battery cover and then close it again.
• In case of replacing the battery pack without selecting the Hot Swap mode, you
cannot perform normal operations for a while.
Installing and Removing the AC Adapter
The AC adapter must be fi tted with a suitable power plug for the region where the terminal
will be used.
IInstallation
1. Insert the protruding part of the AC adapter plug into the recess in the top of the AC
adapter (
) until the plug clicks into place ( ).
Arrow pointing
downwards
USB AC adapter AC adapter for USB and Ethernet
cradles
Removal
1. Push the AC adapter plug release lever in the direction indicated by the arrow in the
fi gure (
) and then pull out the AC adapter plug in the direction of the arrow ( ).
USB AC adapter AC adapter for USB and Ethernet
cradles
Precautions for Use
• Do not insert the plug only into the power outlet.