User Manual

43
USB Cradle (HA-U60IO)
The USB cradle can be used to connect the IT-G600/IT-G650 to devices such as a computer
or USB device. It can also be used to supply power to the IT-G600/IT-G650 and to charge
the battery pack.
Part Names and Operation
<Top> <Left> <Back>
6
3
4
5
12
1 AC Adaptor Jack Used to connect an AC adapter as a power supply.
2 USB Client Port Used to connect to a computer.
3
Charging Status LED
(Battery Pack)
Shows the charging status.
Red: Charging
Green: Charging complete
Flashing alternately red/green: Battery pack fault or outside
charging temperature range
4
Power Supply/
Data Communication Terminal
Used to supply power to the IT-G600/IT-G650 or for data
communication.
5 Mounting Status LED
Indicates the mounting status of the IT-G600/IT-G650.
Red: IT-G600/IT-G650 is not installed.
Green: IT-G600/IT-G650 mounted correctly.
6 Battery Pack Charging Terminals Used to charge the battery pack.
Installing and Connecting the Power Supply
Use the optional AC adaptor(AD-S50400A) to supply power to the charger.
1. Plug the AC adapter into the AC adapter jack on
the back of the USB cradle.
2. Plug the AC adapter into a mains power outlet.
3. When connecting to a computer, plug the USB
cable into the USB client port.
Computer